AD9218BST-105
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e0 |
| Feature | Simultaneous Sampling |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 565mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | AD9218 |
| Pin Count | 48 |
| Operating Supply Voltage | 3V |
| Polarity | Unipolar |
| Power Supplies | 3V |
| Configuration | S/H-ADC |
| Number of Channels | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 565mW |
| Number of Bits | 10 |
| Input Type | Differential, Single Ended |
| Min Input Voltage | 1.19V |
| Architecture | Pipelined |
| Max Input Voltage | 1.31V |
| Converter Type | ADC, PROPRIETARY METHOD |
| Reference Type | Internal |
| Data Interface | Parallel |
| Resolution | 1.25 B |
| Sampling Rate | 105 Msps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 2.7V~3.6V |
| Number of Analog In Channels | 2 |
| Sampling Rate (Per Second) | 105M |
| Power Consumption | 550mW |
| Integral Nonlinearity (INL) | 2.7 LSB |
| Sample and Hold / Track and Hold | TRACK |
| Input Capacitance | 3pF |
| Ratio - S/H:ADC | 1:1 |
| Signal to Noise Ratio (SNR) | 59 dB |
| Differential Nonlinearity | 1.7 LSB |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD9218BST-105 Overview
The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 48-LQFP package.The ADC converter is packaged in the way of Tray.The ADC converter is equipped with 1 Functions .There are 48 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 2 channels.The is equipped with 48 pin count.The peak reflow temperature (Cel) amounts to 240 to be essentially indestructible.There are ADC, PROPRIETARY METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 105M Hz.The input type of this electronic AD converter is Differential, Single Ended.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 48 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to AD9218 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The supply/digital voltage of this electrical AD converter is 2.7V~3.6V.The ADC converter operates with the maximal supply voltage of 3.6V.It operates with the minimal supply voltage of 2.7V.This electrical digital converter operates from a supply voltage of 3V.The ADC converter operates from 3V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 565mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 565mW.The number of channels is growing strong/weak: 2.Simultaneous Sampling can be ensured when operating.The maximal input type of this electronic AD converter is 1.31V.The digital converter supports the minimal input voltage of 1.19V.
AD9218BST-105 Features
1 Functions
48 basic kinds of terminations
48 pin count
Minimal supply voltage of 2.7V
3V power supplies
AD9218BST-105 Applications
There are a lot of Analog Devices Inc. AD9218BST-105 ADC applications.
- Wireless local loop
- Audio/Video devices
- Cell Phones
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- Communications
- Broadband data applications
- High Speed Data Acquisition for PCs
- High Speed Data Acquisition
- Music recording
- Uninterrupted Power Supplies
