AD9233BCPZ-125
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 425mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD9233 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Polarity | Bipolar |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Nominal Supply Current | 220mA |
| Number of Bits | 12 |
| Input Type | Differential, Single Ended |
| Min Input Voltage | 1V |
| Architecture | Pipelined |
| Max Input Voltage | 2V |
| Converter Type | ADC, PROPRIETARY METHOD |
| Supply Type | Single |
| Reference Type | Internal |
| Data Interface | Parallel |
| Resolution | 1.5 B |
| Sampling Rate | 125 Msps |
| Voltage - Supply, Analog | 1.7V~1.9V |
| Voltage - Supply, Digital | 1.7V~3.6V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 125M |
| Output Bit Code | OFFSET BINARY, 2'S COMPLEMENT BINARY, GRAY CODE |
| Linearity Error-Max (EL) | 0.0293% |
| Integral Nonlinearity (INL) | 1.2 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Input Capacitance | 8pF |
| Ratio - S/H:ADC | 1:1 |
| Signal to Noise Ratio (SNR) | 69.5 dB |
| Differential Nonlinearity | 0.5 LSB |
| Height | 950μm |
| Length | 7mm |
| Width | 6.75mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD9233BCPZ-125 Overview
The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 48-VFQFN Exposed Pad, CSP package.The ADC converter is packaged in the way of Tray.The ADC converter is equipped with 1 Functions .There are 48 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 1.8V.The A/D converter has 1 channels.The is equipped with 48 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, PROPRIETARY METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 125M Hz.The input type of this electronic AD converter is Differential, Single Ended.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 48 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 1.7V~1.9V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to AD9233 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.There are several types of supply, categorized by Single.The supply/digital voltage of this electrical AD converter is 1.7V~3.6V.The ADC converter operates with the maximal supply voltage of 1.9V.It operates with the minimal supply voltage of 1.7V.This electrical digital converter operates from a supply voltage of 1.8V. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 425mW.The number of channels is growing strong/weak: 1.The maximal input type of this electronic AD converter is 2V.The digital converter supports the minimal input voltage of 1V.
AD9233BCPZ-125 Features
1 Functions
48 basic kinds of terminations
48 pin count
Minimal supply voltage of 1.7V
AD9233BCPZ-125 Applications
There are a lot of Analog Devices Inc. AD9233BCPZ-125 ADC applications.
- CMOS Image sensors for mobile applications
- High Speed Data Acquisition for PCs
- Communications
- Microcontrollers.
- Digital Storage Oscilloscope
- Imaging Systems
- Automotive
- In-building wireless telephony
- Communication test equipment
- Music recording
