AD9243ASZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-QFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 145mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD9243 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Unipolar |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 20mA |
| Power Dissipation | 145mW |
| Number of Bits | 14 |
| Input Type | Differential, Single Ended |
| Min Input Voltage | 1V |
| Architecture | Pipelined |
| Max Input Voltage | 2.5V |
| Converter Type | ADC, FLASH METHOD |
| Supply Type | Analog, Digital |
| Reference Type | External, Internal |
| Data Interface | Parallel |
| Resolution | 1.75 B |
| Sampling Rate | 3 Msps |
| Voltage - Supply, Analog | 5V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 3M |
| Output Bit Code | BINARY |
| Power Consumption | 110mW |
| Integral Nonlinearity (INL) | 2.5 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Input Capacitance | 16pF |
| Ratio - S/H:ADC | 1:1 |
| Signal to Noise Ratio (SNR) | 80 dB |
| Differential Nonlinearity | 1 LSB |
| Conversion Time-Max | 0.33μs |
| Height | 2mm |
| Length | 10mm |
| Width | 10mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD9243ASZ Overview
The analogue to digital converter is designed with 14 Bits.The AD converter is embedded in the 44-QFP package.The ADC converter is packaged in the way of Tray.The ADC converter is equipped with 1 Functions .There are 44 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 44 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, FLASH METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 3M Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 44 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.75 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to AD9243 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Depending on the supply type, analogue to digital converters can be categorized by Analog, Digital.The ADC converter is possible to mount the device with the help of Surface Mount.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.This electrical digital converter operates from a supply voltage of 5V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 145mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 145mW.The number of channels is growing strong/weak: 1.The maximal input type of this electronic AD converter is 2.5V.The digital converter supports the minimal input voltage of 1V.
AD9243ASZ Features
1 Functions
44 basic kinds of terminations
44 pin count
Minimal supply voltage of 4.75V
AD9243ASZ Applications
There are a lot of Analog Devices Inc. AD9243ASZ ADC applications.
- Medical Instrumentation and medical imaging
- Displaying
- Instrumentation and test equipment
- Telecommunications
- 4-channel data acquisition
- RADAR processing, digital oscilloscopes
- Medical Imaging
- Wireless local loop
- Spectrum Analysis
- Industrial Process Control
