AD9265BCPZ-105
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 439mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD9265 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Polarity | Bipolar |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Interface | LVDS |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Number of Bits | 16 |
| Input Type | Differential |
| Min Input Voltage | 500mV |
| Architecture | Pipelined |
| Max Input Voltage | 1V |
| Converter Type | ADC, FLASH METHOD |
| Reference Type | External, Internal |
| Data Interface | LVDS - Parallel |
| Resolution | 2 B |
| Sampling Rate | 105 Msps |
| Voltage - Supply, Analog | 1.7V~1.9V |
| Voltage - Supply, Digital | 1.7V~1.9V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 105M |
| Output Bit Code | OFFSET BINARY, 2'S COMPLEMENT BINARY, GRAY CODE |
| Linearity Error-Max (EL) | 0.0053% |
| Integral Nonlinearity (INL) | 3.5 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Input Capacitance | 8pF |
| Ratio - S/H:ADC | 1:1 |
| Output Format | PARALLEL, WORD |
| Signal to Noise Ratio (SNR) | 80.2 dB |
| Differential Nonlinearity | -1 LSB |
| Conversion Time-Max | 9.5μs |
| Height | 950μm |
| Length | 7.1mm |
| Width | 7.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD9265BCPZ-105 Overview
The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 48-VFQFN Exposed Pad, CSP package.The ADC converter is packaged in the way of Tray.The ADC converter is equipped with 1 Functions .There are 48 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 1.8V.The A/D converter has 1 channels.The is equipped with 48 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, FLASH METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 105M Hz.The input type of this electronic AD converter is Differential.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 48 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 1.7V~1.9V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to AD9265 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The supply/digital voltage of this electrical AD converter is 1.7V~1.9V.The ADC converter operates with the maximal supply voltage of 1.9V.It operates with the minimal supply voltage of 1.7V.The output formats of this electrical AD converter are PARALLEL, WORD , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 1.8V. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 439mW.The number of channels is growing strong/weak: 1.The maximal input type of this electronic AD converter is 1V.The digital converter supports the minimal input voltage of 500mV.
AD9265BCPZ-105 Features
1 Functions
48 basic kinds of terminations
48 pin count
Minimal supply voltage of 1.7V
AD9265BCPZ-105 Applications
There are a lot of Analog Devices Inc. AD9265BCPZ-105 ADC applications.
- TD-SCDMA, WiMAX
- Broadband data applications
- RADAR processing, digital oscilloscopes
- Spectrum Analysis
- Handheld Terminal Interface
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- In-building wireless telephony
- Digital Storage Oscilloscope
- Multiplexed Data Acquisition Systems
- Data Acquisition Systems
