AD9484BCPZ-500
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 670mW |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD9484 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 1.8V |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Interface | LVDS, Parallel, SPI, Serial |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.75V |
| Operating Supply Current | 372mA |
| Power Dissipation | 670mW |
| Number of Bits | 8 |
| Input Type | Differential |
| Min Input Voltage | 1.18V |
| Architecture | Pipelined |
| Max Input Voltage | 1.6V |
| Converter Type | ADC, FLASH METHOD |
| Supply Type | Single |
| Reference Type | External, Internal |
| Data Interface | LVDS - Parallel |
| Resolution | 1 B |
| Sampling Rate | 500 Msps |
| Voltage - Supply, Analog | 1.75V~1.9V |
| Voltage - Supply, Digital | 1.75V~1.9V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 500M |
| Output Bit Code | OFFSET BINARY, 2'S COMPLEMENT BINARY, GRAY CODE |
| Power Consumption | 670mW |
| Integral Nonlinearity (INL) | 0.15 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Input Capacitance | 1.3pF |
| Ratio - S/H:ADC | 1:1 |
| Output Format | SERIAL, PARALLEL, WORD |
| Signal to Noise Ratio (SNR) | 47 dB |
| Differential Nonlinearity | 0.25 LSB |
| Conversion Time-Max | 0.002μs |
| Height | 950μm |
| Length | 8.1mm |
| Width | 8.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD9484BCPZ-500 Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 56-VFQFN Exposed Pad, CSP package.The ADC converter is packaged in the way of Tray.The ADC converter is equipped with 1 Functions .There are 56 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 1.8V.The A/D converter has 1 channels.The is equipped with 56 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, FLASH METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 500M Hz.The input type of this electronic AD converter is Differential.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 56 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 1.75V~1.9V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to AD9484 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.There are several types of supply, categorized by Single.The supply/digital voltage of this electrical AD converter is 1.75V~1.9V.The ADC converter operates with the maximal supply voltage of 1.9V.It operates with the minimal supply voltage of 1.75V.The output formats of this electrical AD converter are SERIAL, PARALLEL, WORD , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 1.8V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 670mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 670mW.The number of channels is growing strong/weak: 1.The maximal input type of this electronic AD converter is 1.6V.The digital converter supports the minimal input voltage of 1.18V.The output it is configured with uses TTL.This DC DC switching regulator operates from a supply current of 372mA.
AD9484BCPZ-500 Features
1 Functions
56 basic kinds of terminations
56 pin count
Minimal supply voltage of 1.75V
AD9484BCPZ-500 Applications
There are a lot of Analog Devices Inc. AD9484BCPZ-500 ADC applications.
- Medical Imaging
- Communication Systems
- Medical Instrumentation and medical imaging
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- Industrial Process Control
- Uninterrupted Power Supplies
- Multiplexed Data Acquisition Systems
- Automotive
- Digital Multimeters, PLC's (Programming Logic Controllers)
- 4-channel data acquisition
