Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
64-VFQFN Exposed Pad, CSP |
Number of Pins |
64 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tray |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
64 |
ECCN Code |
EAR99 |
Type |
Clock Generator, Fanout Distribution |
Terminal Finish |
Matte Tin (Sn) |
Voltage - Supply |
3.135V~3.465V |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Frequency |
2.335GHz |
Base Part Number |
AD9516 |
Output |
CMOS, LVDS, LVPECL |
Pin Count |
64 |
Number of Outputs |
14 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.465V |
Number of Circuits |
1 |
Frequency (Max) |
2.95GHz |
Number of Inputs |
2 |
Input |
Clock |
Ratio - Input:Output |
1:14 |
PLL |
Yes |
Differential - Input:Output |
Yes/Yes |
Max Duty Cycle |
50 % |
Divider/Multiplier |
Yes/No |
Same Edge Skew-Max (tskwd) |
0.675 ns |
Height |
950μm |
Length |
9.1mm |
Width |
9.1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD9516-2BCPZ Overview
Tray-method packaging is used for clock ICs. As part of the 64-VFQFN Exposed Pad, CSP package, this clock generator is embedded. When reflowed, this frequency generator can withstand a maximum temperature of 260. 64 terminations can be found in frequency synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. This Clock PLL will be fed by Clock as its input. It is possible to access the full performance of the electrical part by implementing 1 circuits. A clock-based RF synthesizer that provides a max frequency of 2.95GHz is available. With the Surface Mount, it is easy to install this electric component on the panel. It would take a maximum supply voltage of 3.465V to operate this time clock generator. This clock PLL works with a supply voltage of 3.135V~3.465V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. It's compatible with CMOS, LVDS, LVPECL logic levels. Clock Generator, Fanout Distribution is the type of electrical part that this component is classified as. In particular, this clock PLL is designed to be used with microprocessors. According to the base part number AD9516, its related parts can be found. There is an available 64 pin on the clock generators. RF synthesizers can handle voltages up to 3.3V. Clock PLL has 14 signal outputs to maximi14e output frequency. As a result of this digital clock generator, there is a low timing skew at 0.675 ns max. By operating at a frequency of 2.335GHz, frequency generator is able to achieve high efficiency. There are 2 inputs on this clock generator.
AD9516-2BCPZ Features
Available in the 64-VFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
AD9516-2BCPZ Applications
There are a lot of Analog Devices Inc. AD9516-2BCPZ Clock Generators applications.
- Computers to manage memory cards
- Jitter reduction
- Digital HDTV systems
- FPGA and processor clocks
- Deep space exploration
- Quenching?
- Microwave radio
- Frequency synthesis
- Integrated phase noise in aerospace systems
- Microwave point-to-point systems