AD9516-3BCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 2GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD9516 |
| Output | CMOS, LVDS, LVPECL |
| Pin Count | 64 |
| Number of Outputs | 14 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.465V |
| Interface | Serial |
| Number of Circuits | 1 |
| Nominal Supply Current | 100μA |
| Frequency (Max) | 2.95GHz |
| Number of Inputs | 2 |
| Input | Clock |
| Ratio - Input:Output | 1:14 |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | Yes/No |
| Same Edge Skew-Max (tskwd) | 0.675 ns |
| Height | 830μm |
| Length | 9mm |
| Width | 9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD9516-3BCPZ Overview
Clock generator is packaged in the way of Tray. Embedded in the 64-VFQFN Exposed Pad, CSP package is this Clock PLL. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. As you can see, it consists of 64 terminations. A voltage of 3.3V should be applied to this electronic frequency generator. Clock is designed for clock generator's input. Using 1 circuits, the electronic part's full performance can be accessed. The frequency generator has a maximum frequency of 2.95GHz. With the Surface Mount, it is easy to install this electric component on the panel. The maximal supply voltage (Vsup) reaches 3.465V. Clock generator ic works with 3.135V~3.465V. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. CMOS, LVDS, LVPECL logic levels are supported by this RF synthesizer. An electrical part such as this one can be classified as a Clock Generator, Fanout Distribution component. An IC that generates clocks specifically for microprocessors, this clock PLL is 64-bits in si64e. Related electrical parts can be found for the base part number AD9516. There is a 64 pin that is available on the digital clock generator. Supply voltage 3.3V is what time clock generator can handle. 14 signal outputs allow for maximi14ation of output frequency. As a result of this digital clock generator, there is a low timing skew at 0.675 ns max. By operating at a frequency of 2GHz, RF synthesizer is able to reali2GHze high efficiency. 2 inputs are employed.
AD9516-3BCPZ Features
Available in the 64-VFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
AD9516-3BCPZ Applications
There are a lot of Analog Devices Inc. AD9516-3BCPZ Clock Generators applications.
- High-speed communication applications
- Picocells, femtocells and small cells
- Precision auxiliary angle deflection measurement
- FSK demodulators
- Carrier synchronization in wired communication
- Small signal recovery
- FMCW Radar
- Broadcast communication
- Microwave backhaul IF
- Main oscillator in receiver
