Parameters |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Frequency |
1.8GHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
AD9516 |
Output |
CMOS, LVDS, LVPECL |
Pin Count |
64 |
Number of Outputs |
14 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.465V |
Number of Circuits |
1 |
Frequency (Max) |
2.95GHz |
Number of Inputs |
2 |
Input |
Clock |
Ratio - Input:Output |
1:14 |
PLL |
Yes |
Differential - Input:Output |
Yes/Yes |
Divider/Multiplier |
Yes/No |
Same Edge Skew-Max (tskwd) |
0.675 ns |
Height |
830μm |
Length |
9mm |
Width |
9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
64-VFQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
64 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tray |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
64 |
ECCN Code |
EAR99 |
Type |
Clock Generator, Fanout Distribution |
Voltage - Supply |
3.135V~3.465V |
Terminal Position |
QUAD |
AD9516-4BCPZ Overview
It is packaged using the Tray method since it is a clock IC. There is a clock generator embedded in the 64-VFQFN Exposed Pad, CSP package. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. It contains a total of 64 terminations within RF synthesizer. The clock generator ic should be grounded with a voltage of 3.3V. In this case, Clock is designed to be the input of the clock generator. To access the full performance of the electronic component, 1 circuits are implemented. The frequency generator has a maximum frequency of 2.95GHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. The maximal supply voltage this clock generator would take is 3.465V. As far as the supply voltage is concerned, clock PLL can be used with 3.135V~3.465V. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. As the name suggests, this is a clock generator that is compatible with CMOS, LVDS, LVPECL logic levels. This electronic component can be classified into Clock Generator, Fanout Distribution. In this IC, a 64-bit frequency generator is designed specifically for use in microprocessors. The related electrical components for the base part number AD9516 can be found below. PF synthesizers is equipped with 64 pins. PLL clock can handle a voltage of 3.3V as its supply voltage. Clock PLL is facilitated with 14 signal outputs to magnify output frequency as high as possible. This clock generator offers low timing skew at 0.675 ns Max. High efficiency is achieved when operating at a frequency of 1.8GHz. On this time clock generator, there are 2 inputs.
AD9516-4BCPZ Features
Available in the 64-VFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
AD9516-4BCPZ Applications
There are a lot of Analog Devices Inc. AD9516-4BCPZ Clock Generators applications.
- Microprocessor clock multipliers
- Media broadcast servers
- Fiber Channel
- Threshold extension
- Frequency synthesis
- Main oscillator in receiver
- Bit synchronization
- Notebooks
- Bluetooth transmitters
- CB radios