AD9517-0ABCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.95GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD9517 |
| Output | LVDS, LVPECL |
| Pin Count | 48 |
| Number of Outputs | 12 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.465V |
| Power Supplies | 3.33.3/5V |
| Number of Circuits | 1 |
| Max Supply Current | 100μA |
| Logic Function | Clock |
| Number of Inputs | 2 |
| Input | CMOS, LVDS, LVPECL |
| Ratio - Input:Output | 1:12 |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | Yes/No |
| Same Edge Skew-Max (tskwd) | 0.675 ns |
| Height | 950μm |
| Length | 7.1mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD9517-0ABCPZ Overview
As a clock IC, PLLs is packaged using the Tray method. Clock PLL is embedded in the 48-VFQFN Exposed Pad, CSP package. When reflowed, this frequency generator can withstand a maximum temperature of 260. It contains a total of 48 terminations within RF synthesizer. The clock generator ic should be grounded with a voltage of 3.3V. It is designed that the Clock PLL's input should be CMOS, LVDS, LVPECL. 1 circuits are used to achieve clock PLL's superior flexibility. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. Approximately 3.465V is the maximum supply voltage needed by this time clock generator. This clock PLL works with a supply voltage of 3.135V~3.465V. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. LVDS, LVPECL is designed for clock generator's output. As far as electrical parts go, this component can be classified as a Clock Generator, Fanout Distribution component. The clock-generating IC is a 48-bit device designed specifically for microprocessors. AD9517 is the base part number for finding related electronic parts. PLL is designed with 48 pins. In terms of the supply voltage, analog clock generator can handle 3.3V volts. The output frequency can be magnified as high as possible with the assistance of 12 signal outputs. At 0.675 ns Max, this clock generator offers low timing skew. Using a frequency of 2.95GHz allows frequency synthesizer to achieve high efficiencies. This RF synthesizer operation requires a maximum current of 100μA. Data input is combined with logic clock function Clock to create this RF synthesizer. The time clock generator uses 2 inputs.
AD9517-0ABCPZ Features
Available in the 48-VFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
AD9517-0ABCPZ Applications
There are a lot of Analog Devices Inc. AD9517-0ABCPZ Clock Generators applications.
- Mixed mode (analog and digital) applications
- Microwave backhaul IF
- Integrated phase noise in aerospace systems
- Wireless handsets
- Pagers
- Deep space exploration
- Coherent detection of the signal
- Satellite receivers
- Medical equipment
- Test and instrumentation equipment
