AD9517-1ABCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.65GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD9517 |
| Output | CMOS, LVDS, LVPECL |
| Pin Count | 48 |
| Number of Outputs | 12 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.465V |
| Power Supplies | 3.33.3/5V |
| Number of Circuits | 1 |
| Max Supply Current | 100μA |
| Logic Function | Clock |
| Number of Inputs | 2 |
| Input | CMOS, LVDS, LVPECL |
| Ratio - Input:Output | 1:12 |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | Yes/No |
| Same Edge Skew-Max (tskwd) | 0.675 ns |
| Height | 950μm |
| Length | 7.1mm |
| Width | 7.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD9517-1ABCPZ Overview
The Tray method is used for packaging clock ICs. A Clock PLL is included with the 48-VFQFN Exposed Pad, CSP package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. As you can see, it consists of 48 terminations. For this clock generator ic, a voltage of 3.3V is required. CMOS, LVDS, LVPECL is designed for clock generator's input. 1 circuits are implemented to access the electronic component's full performance. The Surface Mount allows the electrical component to be installed conveniently on the panel. The maximum voltage this clock PLL can handle is 3.465V. This clock PLL works with a supply voltage of 3.135V~3.465V. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. There are several logic levels in CMOS, LVDS, LVPECL logic that can be used with this clock generator. This electronic component can be classified as a Clock Generator, Fanout Distribution. It is a 48-bit clock PLL designed specifically for microprocessors. You can find related electrical components to the base part number AD9517. Clock generator is designed with 48 pins. RF synthesizers can handle voltages up to 3.3V. The frequency synthesizer features 12 signal outputs to ensure as high a frequency as possible. At maximum 0.675 ns, this analog clock generator has low timing skew. By operating at a frequency of 2.65GHz, frequency generator is able to achieve high efficiency. In this operation, a maximum current of 100μA is supplied to the clock generator. Clock logic function Clock are combined with input data in this frequency synthesizer. There are 2 inputs on this clock generator.
AD9517-1ABCPZ Features
Available in the 48-VFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
AD9517-1ABCPZ Applications
There are a lot of Analog Devices Inc. AD9517-1ABCPZ Clock Generators applications.
- Wide area power system
- Reference signals to RF systems
- DVD add-on cards for multimedia PCs
- Symbol synchronization
- Microprocessor clock multipliers
- Antenna automatic tracking
- Signal analyzer
- Media broadcast servers
- Signal frequency synthesis circuits
- Carrier synchronization in wired communication
