banner_page

AD9517-1ABCPZ-RL7

3.3V Clock Generator, Fanout Distribution 2.65GHz AD9517 Clock Generators 48 Pins 48-VFQFN Exposed Pad, CSP 48 Terminals Surface Mount 3.135V~3.465V Tape & Reel (TR)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-AD9517-1ABCPZ-RL7
  • Package: 48-VFQFN Exposed Pad, CSP
  • Datasheet: PDF
  • Stock: 772
  • Description: 3.3V Clock Generator, Fanout Distribution 2.65GHz AD9517 Clock Generators 48 Pins 48-VFQFN Exposed Pad, CSP 48 Terminals Surface Mount 3.135V~3.465V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Surface Mount YES
Number of Pins 48
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 48
ECCN Code EAR99
Type Clock Generator, Fanout Distribution
Voltage - Supply 3.135V~3.465V
Terminal Position QUAD
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number AD9517
Output CMOS, LVDS, LVPECL
Pin Count 48
Number of Outputs 12
Qualification Status Not Qualified
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.465V
Power Supplies 3.33.3/5V
Number of Circuits 1
Frequency (Max) 2.65GHz
Logic Function Clock
Number of Inputs 2
Input CMOS, LVDS, LVPECL
Ratio - Input:Output 1:12
PLL Yes
Differential - Input:Output Yes/Yes
Divider/Multiplier Yes/No
Same Edge Skew-Max (tskwd) 0.675 ns
Length 7mm
Width 7mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 month ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 48-VFQFN Exposed Pad, CSP

AD9517-1ABCPZ-RL7 Overview


It is packaged using the Tape & Reel (TR) method since it is a clock IC. Embedded in the 48-VFQFN Exposed Pad, CSP package is this Clock PLL. This clock generator ic can sustain a maximum temperature of 260 during reflowing. There are 48 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. The input of this clock generator is designed to be CMOS, LVDS, LVPECL. It is possible to access the full performance of the electrical part by implementing 1 circuits. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 2.65GHz. PLL clock is mounted in the way of Surface Mount. Approximately 3.465V is the maximum supply voltage needed by this time clock generator. As far as the supply voltage is concerned, clock PLL can be used with 3.135V~3.465V. The temperature should be set at -40°C~85°C to ensure reliable performance. A frequency synthesizer which is compatible with the CMOS, LVDS, LVPECL logic levels is presented here. This electronic component can be classified as a Clock Generator, Fanout Distribution. In particular, this clock PLL is designed to be used with microprocessors. It is possible to find its related electronic parts by searching for the base part number AD9517. A 48 pin is available on the PLL. There is a maximum supply voltage of 3.3V that clock generator can handle. Clock PLL has 12 signal outputs to maximi12e output frequency. At maximum 0.675 ns, this analog clock generator has low timing skew. Clock logic function Clock are combined with input data in this frequency synthesizer. 2 inputs are employed.

AD9517-1ABCPZ-RL7 Features


Available in the 48-VFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V

AD9517-1ABCPZ-RL7 Applications


There are a lot of Analog Devices Inc. AD9517-1ABCPZ-RL7 Clock Generators applications.

  • Clock recovery
  • Wireless base station for LTE, LTE-advanced
  • VSAT (Small Ground Satellite Station)
  • Modems
  • Ultrasound diagnosis
  • Tracking filters
  • Peripheral devices
  • Mixed mode (analog and digital) applications
  • Quenching?
  • Frequency synthesis

Write a review

Note: HTML is not translated!
    Bad           Good