AD9517-2ABCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.335GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD9517 |
| Output | CMOS, LVDS, LVPECL |
| Pin Count | 48 |
| Number of Outputs | 12 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.465V |
| Power Supplies | 3.33.3/5V |
| Number of Circuits | 1 |
| Operating Supply Current | 20mA |
| Max Supply Current | 100μA |
| Frequency (Max) | 2.33GHz |
| Logic Function | Clock |
| Number of Inputs | 2 |
| Input | CMOS, LVDS, LVPECL |
| Ratio - Input:Output | 1:12 |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Max Duty Cycle | 50 % |
| Divider/Multiplier | Yes/No |
| Same Edge Skew-Max (tskwd) | 0.675 ns |
| Height | 950μm |
| Length | 7.1mm |
| Width | 7.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD9517-2ABCPZ Overview
As a clock IC, it is packaged by the Tray method. The 48-VFQFN Exposed Pad, CSP package contains this clock generator. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 48 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. There is a Clock PLL called CMOS, LVDS, LVPECL which is designed to be the input to this clock generator. For a full understanding of the electronic part's performance, 1 circuits are implemented. This clock-based frequency generator provides a frequency up to 2.33GHz Max. The Surface Mount allows the electrical component to be installed conveniently on the panel. It would take a maximum supply voltage of 3.465V to operate this time clock generator. Clock generator ic works with 3.135V~3.465V. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. There are several logic levels in CMOS, LVDS, LVPECL logic that can be used with this clock generator. An electrical part such as this one can be classified as a Clock Generator, Fanout Distribution component. Microprocessor-specific clock PLL with 48 bits. The related electrical components for the base part number AD9517 can be found below. There are 48 pins that are available on the frequency generator. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. 12 signal outputs maximi12e the output frequency. As a result of this digital clock generator, there is a low timing skew at 0.675 ns max. When operated at 2.335GHz, frequency synthesizer achieves high efficiency. A supply current of 20mA is required to fully operate clock PLL. This RF synthesizer operation requires a maximum current of 100μA. Input data is combined with clock logic function Clock in this clock generator. Here's a clock generator with 2 inputs.
AD9517-2ABCPZ Features
Available in the 48-VFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
AD9517-2ABCPZ Applications
There are a lot of Analog Devices Inc. AD9517-2ABCPZ Clock Generators applications.
- Peripheral devices
- Various decoding circuits
- Frequency shifting decodes
- Microwave point-to-point systems
- Pagers
- FMCW Radar
- Local oscillators (LOs)
- Main oscillator in receiver
- Signal generator
- MRI
