AD9517-2ABCPZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD9517 |
| Output | CMOS, LVDS, LVPECL |
| Pin Count | 48 |
| Number of Outputs | 12 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.465V |
| Power Supplies | 3.33.3/5V |
| Number of Circuits | 1 |
| Frequency (Max) | 2.33GHz |
| Logic Function | Clock |
| Number of Inputs | 2 |
| Input | CMOS, LVDS, LVPECL |
| Ratio - Input:Output | 1:12 |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | Yes/No |
| Same Edge Skew-Max (tskwd) | 0.675 ns |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD9517-2ABCPZ-RL7 Overview
Clock ICs are packaged using the Tape & Reel (TR) method. There is a clock generator embedded in the 48-VFQFN Exposed Pad, CSP package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. It contains a total of 48 terminations within RF synthesizer. The clock generator ic should be grounded with a voltage of 3.3V. In this clock generator, CMOS, LVDS, LVPECL is used as the input to the clock. A total of 1 circuits are implemented to access the full performance of the electrical part. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 2.33GHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. The maximal supply voltage (Vsup) reaches 3.465V. There should be 3.135V~3.465V provided with this RF synthesizer. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. A frequency synthesizer which is compatible with the CMOS, LVDS, LVPECL logic levels is presented here. This electronic component is usually classified as a Clock Generator, Fanout Distribution component. There is a 48-bit clock-generating IC built specifically for microprocessors in this frequency generator. This part number is related to its related electronic parts. A 48 pin is available on the PLL. In terms of the supply voltage, PLL clock can handle 3.3V volts. The output frequency can be magnified as high as possible with the assistance of 12 signal outputs. At 0.675 ns Max, this clock generator offers low timing skew. Data input is combined with logic clock function Clock to create this RF synthesizer. 2 inputs are employed.
AD9517-2ABCPZ-RL7 Features
Available in the 48-VFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
AD9517-2ABCPZ-RL7 Applications
There are a lot of Analog Devices Inc. AD9517-2ABCPZ-RL7 Clock Generators applications.
- Clock signals to the high-speed Digital RF circuits
- Frequency Modulation (FM) stereo decoders
- Cell phones
- Wireless base station for LTE, LTE-advanced
- Carrier synchronization in wired communication
- Reference signals to RF systems
- Quenching?
- Set-top boxes
- Clock generation systems
- Frequency synthesis
