Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
48-VFQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
48 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tray |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Type |
Clock Generator, Fanout Distribution |
Voltage - Supply |
3.135V~3.465V |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Frequency |
1.8GHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD9517 |
Output |
CMOS, LVDS, LVPECL |
Pin Count |
48 |
Number of Outputs |
12 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.465V |
Power Supplies |
3.33.3/5V |
Interface |
Parallel, Serial |
Number of Circuits |
1 |
Nominal Supply Current |
20mA |
Max Supply Current |
100μA |
Logic Function |
Clock |
Number of Inputs |
2 |
Input |
CMOS, LVDS, LVPECL |
Ratio - Input:Output |
1:12 |
PLL |
Yes |
Differential - Input:Output |
Yes/Yes |
Divider/Multiplier |
Yes/No |
Same Edge Skew-Max (tskwd) |
0.675 ns |
Height |
950μm |
Length |
7.1mm |
Width |
7.1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD9517-4ABCPZ Overview
This clock IC is packaged using the Tray method. The 48-VFQFN Exposed Pad, CSP package embeds this Clock PLL. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are 48 terminations found in the file. The supply voltage of 3.3V allows for high efficiency. This clock generator receives its inputs from CMOS, LVDS, LVPECL, which is designed to be the clock source. 1 circuits are used to achieve clock PLL's superior flexibility. The Surface Mount allows this electrical component to be easily installed on the panel. 3.465V would be the maximum supply voltage for this clock generator. As far as the supply voltage is concerned, clock PLL can be used with 3.135V~3.465V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. In this case, we are dealing with a frequency synthesizer that can be used with CMOS, LVDS, LVPECL logic levels. It is possible to classify this electronic component as a Clock Generator, Fanout Distribution. Microprocessor-specific clock PLL with 48 bits. According to the base part number, its related parts can be founded. A 48 pin is available on the PLL. The supply voltage should be maintained at 3.3V for high efficiency. 12 signal outputs allow for maximi12ation of output frequency. At 0.675 ns Max, this analog clock generator exhibits low timing skew. At a frequency of 1.8GHz, the system can achieve high efficiency. This RF synthesizer operation requires a maximum current of 100μA. PLL is able to deliver the logic function of Clock. On this time clock generator, there are 2 inputs.
AD9517-4ABCPZ Features
Available in the 48-VFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
AD9517-4ABCPZ Applications
There are a lot of Analog Devices Inc. AD9517-4ABCPZ Clock Generators applications.
- Cable television converter boxes
- Laptops
- Frequency shifting decodes
- FSK demodulators
- Wide area power system
- Space communucation
- Signal modulation and demodulation
- Integrated phase noise in aerospace systems
- Aerospace and defense
- Clock signals to the high-speed Digital RF circuits