Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mounting Type |
Surface Mount |
Package / Case |
48-VFQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
48 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Type |
Clock Generator, Fanout Distribution |
Terminal Finish |
Matte Tin (Sn) |
Voltage - Supply |
3.135V~3.465V |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD9517 |
Output |
CMOS, LVDS, LVPECL |
Pin Count |
48 |
Number of Outputs |
12 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.465V |
Power Supplies |
3.33.3/5V |
Number of Circuits |
1 |
Frequency (Max) |
1.8GHz |
Logic Function |
Clock |
Number of Inputs |
2 |
Input |
CMOS, LVDS, LVPECL |
Ratio - Input:Output |
1:12 |
PLL |
Yes |
Differential - Input:Output |
Yes/Yes |
Divider/Multiplier |
Yes/No |
Same Edge Skew-Max (tskwd) |
0.675 ns |
Length |
7mm |
Width |
7mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD9517-4ABCPZ-RL7 Overview
A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. Embedded in the 48-VFQFN Exposed Pad, CSP package is this Clock PLL. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. 48 terminations can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 3.3V. This clock generator receives its inputs from CMOS, LVDS, LVPECL, which is designed to be the clock source. For full access to the electronic component's capabilities, 1 circuits are implemented. The frequency generator has a maximum frequency of 1.8GHz. The Surface Mount allows the electrical component to be installed conveniently on the panel. Clock generators can take up to 3.465V of power as a maximum supply voltageThis clock PLL works with a supply voltage of 3.135V~3.465V. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. As the name suggests, this is a clock generator that is compatible with CMOS, LVDS, LVPECL logic levels. As far as electrical parts go, this component can be classified as a Clock Generator, Fanout Distribution component. It is a 48-bit IC that is designed for microprocessors specifically. According to the base part number, its related parts can be founded. PLL is designed with 48 pins. RF synthesizers can handle a voltage of 3.3V as the supply voltage. Clock PLL has 12 signal outputs to maximi12e output frequency. As a result of this digital clock generator, there is a low timing skew at 0.675 ns max. Clock logic function Clock are combined with input data in this frequency synthesizer. The time clock generator uses 2 inputs.
AD9517-4ABCPZ-RL7 Features
Available in the 48-VFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
AD9517-4ABCPZ-RL7 Applications
There are a lot of Analog Devices Inc. AD9517-4ABCPZ-RL7 Clock Generators applications.
- Signal frequency synthesis circuits
- Pagers
- Notebooks
- Time to digital converters
- Quenching?
- Phase modulation cellular systems
- GPS systems
- Wireless base station for LTE, LTE-advanced
- Clock signals to the high-speed Digital RF circuits
- Coherent carrier tracking