banner_page

AD9518-3ABCPZ

3.3V Clock Generator, Fanout Distribution AD9518 Clock Generators 48 Pins 48-VFQFN Exposed Pad, CSP 48 Terminals Surface Mount 3.135V~3.465V Tray


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-AD9518-3ABCPZ
  • Package: 48-VFQFN Exposed Pad, CSP
  • Datasheet: PDF
  • Stock: 684
  • Description: 3.3V Clock Generator, Fanout Distribution AD9518 Clock Generators 48 Pins 48-VFQFN Exposed Pad, CSP 48 Terminals Surface Mount 3.135V~3.465V Tray (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 week ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 48-VFQFN Exposed Pad, CSP
Surface Mount YES
Number of Pins 48
Operating Temperature -40°C~85°C
Packaging Tray
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 48
ECCN Code EAR99
Type Clock Generator, Fanout Distribution
Voltage - Supply 3.135V~3.465V
Terminal Position QUAD
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Frequency 2.25GHz
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number AD9518
Output LVPECL
Pin Count 48
Number of Outputs 6
Operating Supply Voltage 3.3V
Interface Parallel, Serial
Number of Circuits 1
Max Supply Current 100μA
Logic Function Clock
Number of Inputs 2
Input CMOS, LVDS, LVPECL
Ratio - Input:Output 1:6
PLL Yes
Differential - Input:Output Yes/Yes
Divider/Multiplier Yes/No
Height 950μm
Length 7.1mm
Width 7.1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

AD9518-3ABCPZ Overview


A clock integrated circuit is packaged in a Tray-shaped package because it is for use as a clock. The 48-VFQFN Exposed Pad, CSP package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. As you can see, it consists of 48 terminations. This time clock generator should be voltaged at 3.3V. It is designed that the Clock PLL's input should be CMOS, LVDS, LVPECL. For a full understanding of the electronic part's performance, 1 circuits are implemented. The Surface Mount allows this electrical component to be easily installed on the panel. This clock PLL works with a supply voltage of 3.135V~3.465V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. LVPECL logic levels are supported by this RF synthesizer. It is possible to classify this electronic component as a Clock Generator, Fanout Distribution. Clock PLL is equipped with 48 pin count. The related electrical components for the base part number AD9518 can be found below. There are 48 pins that are available on the frequency generator. There is a maximum supply voltage of 3.3V that this analog clock generator can handle. The output frequency can be magnified as high as possible with the assistance of 6 signal outputs. At a frequency of 2.25GHz, frequency generator is capable of achieving high efficiency. The maximal current supplied for this frequency synthesizer operation reaches 100μA. Input data is combined with clock logic function Clock in this clock generator. Here's a clock generator with 2 inputs.

AD9518-3ABCPZ Features


Available in the 48-VFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V

AD9518-3ABCPZ Applications


There are a lot of Analog Devices Inc. AD9518-3ABCPZ Clock Generators applications.

  • Digital switching systems
  • Test equipment
  • Set-top boxes
  • Multi-function printers
  • Vector network analyzers (VNA)
  • Melting
  • Carrier synchronization in wired communication
  • Broadcast communication
  • Simple clock clean-up circuits
  • CB radios

Write a review

Note: HTML is not translated!
    Bad           Good