AD9518-3ABCPZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD9518 |
| Output | LVPECL |
| Pin Count | 48 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Frequency (Max) | 2.25GHz |
| Logic Function | Clock |
| Number of Inputs | 2 |
| Input | CMOS, LVDS, LVPECL |
| Ratio - Input:Output | 1:6 |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | Yes/No |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD9518-3ABCPZ-RL7 Overview
It is packaged using the Tape & Reel (TR) method since it is a clock IC. This clock generator is embedded in the 48-VFQFN Exposed Pad, CSP package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. As a result, frequency synthesizers can be found to contain 48 terminations. This electronic frequency generator requires a voltage of 3.3V. This Clock PLL will be fed by CMOS, LVDS, LVPECL as its input. It is possible to access the full performance of the electrical part by implementing 1 circuits. An upper frequency limit of 2.25GHz Max can be achieved with this clock-based frequency synthesizer. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There are 3.135V~3.465V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. In this case, we are dealing with a frequency synthesizer that can be used with LVPECL logic levels. This electronic component can be classified as a Clock Generator, Fanout Distribution. There is a 48-bit clock-generating IC built specifically for microprocessors in this frequency generator. According to the base part number AD9518, its related parts can be found. It is possible to connect to the frequency generators via 48 pins. In terms of the supply voltage, analog clock generator can handle 3.3V volts. 6 signal outputs maximi6e the output frequency. PLL is able to deliver the logic function of Clock. Here's a clock generator with 2 inputs.
AD9518-3ABCPZ-RL7 Features
Available in the 48-VFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
AD9518-3ABCPZ-RL7 Applications
There are a lot of Analog Devices Inc. AD9518-3ABCPZ-RL7 Clock Generators applications.
- CPUs
- Wireless infrastructure
- Cell phones
- Radiotelephones
- Local oscillator source in receiver
- DVD recorders
- Clock recovery
- Time to digital converters
- Satellite receivers
- FMCW Radar
