banner_page

AD9520-2BCPZ

3.3V Clock Generator, Fanout Distribution 2.33GHz AD9520 Clock Generators 64 Pins 64-VFQFN Exposed Pad, CSP 64 Terminals Surface Mount 3.135V~3.465V Tray


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-AD9520-2BCPZ
  • Package: 64-VFQFN Exposed Pad, CSP
  • Datasheet: PDF
  • Stock: 867
  • Description: 3.3V Clock Generator, Fanout Distribution 2.33GHz AD9520 Clock Generators 64 Pins 64-VFQFN Exposed Pad, CSP 64 Terminals Surface Mount 3.135V~3.465V Tray (Kg)

Details

Tags

Parameters
Output CMOS, LVPECL
Pin Count 64
Number of Outputs 12
Qualification Status Not Qualified
Operating Supply Voltage 3.3V
Number of Circuits 1
Max Supply Current 100μA
Frequency (Max) 2.33GHz
Logic Function Clock
Input CMOS, LVDS, LVPECL
Ratio - Input:Output 2:12, 2:24
Primary Clock/Crystal Frequency-Nom 33.33MHz
PLL Yes
Differential - Input:Output Yes/Yes
Divider/Multiplier Yes/No
Height 950μm
Length 9.1mm
Width 9.1mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 week ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 64-VFQFN Exposed Pad, CSP
Surface Mount YES
Number of Pins 64
Operating Temperature -40°C~85°C
Packaging Tray
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 64
ECCN Code EAR99
Type Clock Generator, Fanout Distribution
Voltage - Supply 3.135V~3.465V
Terminal Position QUAD
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Frequency 2.335GHz
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number AD9520

AD9520-2BCPZ Overview


This clock IC is packaged using the Tray method. There is a clock generator embedded in the 64-VFQFN Exposed Pad, CSP package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. 64 terminations can be found in frequency generators. To operate this time clock generator, 3.3V voltage should be applied. A clock generator's input is called CMOS, LVDS, LVPECL and it is designed as the input for this clock generator. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. RF synthesizers based on this clock provide frequencies up to 2.33GHz maximum. Thanks to the Surface Mount, this electric component can easily be installed on a panel. As far as the supply voltage is concerned, clock PLL can be used with 3.135V~3.465V. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. I would like to present to you a frequency synthesizer that is compatible with CMOS, LVPECL logic levels. This electronic component can be classified as a Clock Generator, Fanout Distribution. It is a 64-bit clock PLL designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number AD9520. A 64 pin is available on the PLL. Clock PLL is capable of handling a voltage of 3.3V. 12 signal outputs are provided for enhancing output frequency as much as possible. Frequency generator is able to reali2.335GHze high efficiency when operating at a frequency of 2.335GHz. The maximal current supplied for phase locked loop's operation reaches 100μA. Clock logic function Clock are combined with input data in this frequency synthesizer.

AD9520-2BCPZ Features


Available in the 64-VFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V

AD9520-2BCPZ Applications


There are a lot of Analog Devices Inc. AD9520-2BCPZ Clock Generators applications.

  • Medical equipment
  • Notebooks
  • Radio receivers
  • Aerospace and defense
  • Frequency synthesis
  • Pulsed digital systems
  • Media broadcast servers
  • Simple clock clean-up circuits
  • Small signal recovery
  • Melting

Write a review

Note: HTML is not translated!
    Bad           Good