AD9520-4BCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.8GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD9520 |
| Output | CMOS, LVPECL |
| Pin Count | 64 |
| Number of Outputs | 12 |
| Operating Supply Voltage | 3.3V |
| Interface | Parallel, Serial |
| Number of Circuits | 1 |
| Logic Function | Clock |
| Input | CMOS, LVDS, LVPECL |
| Ratio - Input:Output | 2:12, 2:24 |
| Primary Clock/Crystal Frequency-Nom | 33.33MHz |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Max Duty Cycle | 50 % |
| Divider/Multiplier | Yes/No |
| Height | 950μm |
| Length | 9.1mm |
| Width | 9.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD9520-4BCPZ Overview
Clock ICs are packaged using the Tray method. In the 64-VFQFN Exposed Pad, CSP package, there is an embedded clock generator. This clock generator ic can sustain 260 degrees of temperature during reflowing. 64 terminations can be found in frequency synthesizer. This clock generator ic should receive a voltage of 3.3V. In this case, CMOS, LVDS, LVPECL is designed to be the input of the clock generator. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. This component can be conveniently installed on the panel thanks to the Surface Mount. As long as there are 3.135V~3.465V supply voltages provided, clock generator ic should work. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. A frequency synthesizer which is compatible with the CMOS, LVPECL logic levels is presented here. An electrical part such as this one can be classified as a Clock Generator, Fanout Distribution component. Microprocessor-specific clock PLL with 64 bits. This part number is related to its related electronic parts. It is possible to connect to the frequency generators via 64 pins. RF synthesizers can handle a voltage of 3.3V as the supply voltage. 12 signal outputs enable clock PLL to magnify output frequency as high as possible. At a frequency of 1.8GHz, frequency generator is capable of achieving high efficiency. On the basis of input data, this RF synthesizer combines clock logic function Clock.
AD9520-4BCPZ Features
Available in the 64-VFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
AD9520-4BCPZ Applications
There are a lot of Analog Devices Inc. AD9520-4BCPZ Clock Generators applications.
- Skew suppression
- Electronic countermeasures
- Tracking filters
- Radiotelephones
- Cable television converter boxes
- Local oscillator source in receiver
- Microprocessor clock multipliers
- High-speed optical transport network (OTN)
- VSAT (Small Ground Satellite Station)
- FPGA and processor clocks
