AD9522-3BCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.25GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD9522 |
| Output | CMOS, LVDS |
| Pin Count | 64 |
| Number of Outputs | 12 |
| Operating Supply Voltage | 3.3V |
| Power Supplies | 3.3/5V |
| Number of Circuits | 1 |
| Max Supply Current | 100μA |
| Logic Function | Clock |
| Input | CMOS, LVDS, LVPECL |
| Ratio - Input:Output | 2:12, 2:24 |
| Primary Clock/Crystal Frequency-Nom | 250MHz |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | Yes/No |
| Height | 950μm |
| Length | 9mm |
| Width | 9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD9522-3BCPZ Overview
As a clock IC, it uses the Tray package. The 64-VFQFN Exposed Pad, CSP package embeds this Clock PLL. This clock generator ic can sustain 260 degrees of temperature during reflowing. As a result of this, we can find 64 terminations. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. It is designed that the Clock PLL's input should be CMOS, LVDS, LVPECL. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. With the Surface Mount, it is easy to install this electric component on the panel. In terms of supply voltage, RF synthesizer works with 3.135V~3.465V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. A frequency synthesizer which is compatible with the CMOS, LVDS logic levels is presented here. A Clock Generator, Fanout Distribution is a classification for the electronic part in question. It is a 64-bit IC that is designed for microprocessors specifically. AD9522 is the base part number for finding related electronic parts. There are a number of 64 pins that are available on the frequency synthesizers. There is a maximum supply voltage of 3.3V that clock generator can handle. The output frequency can be magnified as high as possible with the assistance of 12 signal outputs. At a frequency of 2.25GHz, the system can achieve high efficiency. In this operation, a maximum current of 100μA is supplied to the clock generator. This clock generator combines clock logic function Clock on input data.
AD9522-3BCPZ Features
Available in the 64-VFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
AD9522-3BCPZ Applications
There are a lot of Analog Devices Inc. AD9522-3BCPZ Clock Generators applications.
- MRI
- Skew suppression
- Test and instrumentation equipment
- High-speed communication applications
- Mixed mode (analog and digital) applications
- Infotainment systems
- Medical equipment
- Digital HDTV systems
- FMCW Radar
- Microprocessor clock multipliers
