banner_page

AD9540BCPZ

1.8V Clock Generator AD9540 Clock Generators 48 Pins 48-VFQFN Exposed Pad, CSP 48 Terminals Surface Mount 1.71V~1.89V Tray


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-AD9540BCPZ
  • Package: 48-VFQFN Exposed Pad, CSP
  • Datasheet: PDF
  • Stock: 789
  • Description: 1.8V Clock Generator AD9540 Clock Generators 48 Pins 48-VFQFN Exposed Pad, CSP 48 Terminals Surface Mount 1.71V~1.89V Tray (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 48-VFQFN Exposed Pad, CSP
Surface Mount YES
Number of Pins 48
Operating Temperature -40°C~85°C
Packaging Tray
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 48
ECCN Code EAR99
Type Clock Generator
Technology CMOS
Voltage - Supply 1.71V~1.89V
Terminal Position QUAD
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) 260
Supply Voltage 1.8V
Terminal Pitch 0.5mm
Frequency 655MHz
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number AD9540
Output CML, PECL
Pin Count 48
Number of Outputs 1
Qualification Status Not Qualified
Nominal Supply Current 17mA
Max Supply Current 5μA
Input Clock
Ratio - Input:Output 2:2
Primary Clock/Crystal Frequency-Nom 2700MHz
PLL Yes
Differential - Input:Output Yes/Yes
Max Duty Cycle 58 %
Divider/Multiplier Yes/No
Height 800μm
Length 7mm
Width 7mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

AD9540BCPZ Overview


As a clock IC, it uses the Tray package. The 48-VFQFN Exposed Pad, CSP package includes this clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. As a result, frequency synthesizers can be found to contain 48 terminations. This time clock generator should be voltaged at 1.8V. The input of this clock generator is designed to be Clock. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Clock generators should operate with the voltage supply of 1.71V~1.89V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. There are several logic levels in CML, PECL logic that can be used with this clock generator. This electronic component can be classified as a Clock Generator. There is a 48-bit clock-generating IC built specifically for microprocessors in this frequency generator. This part number is related to its related electronic parts. There is a 48 pin that is available on the digital clock generator. The output frequency is magnified as high as possible with 1 signal outputs. At 655MHz, frequency synthesizer achieves high efficiency. In this RF synthesizer operation, 5μA of current are supplied.

AD9540BCPZ Features


Available in the 48-VFQFN Exposed Pad, CSP
Supply voltage of 1.8V

AD9540BCPZ Applications


There are a lot of Analog Devices Inc. AD9540BCPZ Clock Generators applications.

  • Bluetooth receivers
  • Closed circuit systems
  • Satellite navigation communication
  • Microprocessor clock multipliers
  • Wi-Fi routers
  • Clock synchronization
  • Clock signals to the high-speed Digital RF circuits
  • Clock recovery
  • Test equipment
  • Various decoding circuits

Write a review

Note: HTML is not translated!
    Bad           Good