AD9571ACPZPEC
| Parameters | |
|---|---|
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-WFQFN Exposed Pad, CSP |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution, Multiplexer |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD9571 |
| Output | CMOS, LVDS, LVPECL |
| Pin Count | 40 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1μA |
| Frequency (Max) | 156.25MHz |
| Input | Crystal |
| Ratio - Input:Output | 1:10 |
| PLL | Yes |
| Differential - Input:Output | No/Yes |
| Divider/Multiplier | Yes/No |
| Height | 750μm |
| Length | 6.1mm |
| Width | 6.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AD9571ACPZPEC Overview
Tray-method packaging is used for clock ICs. In the 40-WFQFN Exposed Pad, CSP package, there is an embedded clock generator. This clock generator will sustain a maximum temperature of 260 when reflown. There are 40 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. In this clock generator, Crystal is used as the input to the clock. Providing a maximum frequency of 156.25MHz, this clock-based RF synthesizer is suitable for a variety of applications. The Surface Mount allows the electrical component to be installed conveniently on the panel. This clock generator would require a maximum supply voltage of 3.6V. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. As long as you provide 2.97V~3.63V supply voltage, it will work. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. It's compatible with CMOS, LVDS, LVPECL logic levels. As far as electrical parts go, this component can be classified as a Clock Generator, Fanout Distribution, Multiplexer component. It is a 40-bit IC that is designed for microprocessors specifically. AD9571 is the base part number for finding related electronic parts. There are a number of 40 pins that are available on the frequency synthesizers. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. 1 signal outputs allow for maximi1ation of output frequency. At a frequency of 25MHz, frequency generator is capable of achieving high efficiency. This RF synthesizer operation requires a maximum current of 1μA.
AD9571ACPZPEC Features
Available in the 40-WFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
AD9571ACPZPEC Applications
There are a lot of Analog Devices Inc. AD9571ACPZPEC Clock Generators applications.
- Cable television converter boxes
- Frequency synthesis
- High-frequency induction heating
- Bluetooth receivers
- Signal generator
- Time to digital converters
- Digital HDTV systems
- Main oscillator in receiver
- Reference signals to RF systems
- Picocells, femtocells and small cells
