banner_page

AD9572ACPZPEC-R7

3.3V Clock Generator, Fanout Distribution, Multiplexer 156.25MHz AD9572 Clock Generators 40 Pins 40-WFQFN Exposed Pad, CSP 40 Terminals Surface Mount 2.97V~3.63V Tape & Reel (TR)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-AD9572ACPZPEC-R7
  • Package: 40-WFQFN Exposed Pad, CSP
  • Datasheet: PDF
  • Stock: 656
  • Description: 3.3V Clock Generator, Fanout Distribution, Multiplexer 156.25MHz AD9572 Clock Generators 40 Pins 40-WFQFN Exposed Pad, CSP 40 Terminals Surface Mount 2.97V~3.63V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 week ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 40-WFQFN Exposed Pad, CSP
Surface Mount YES
Number of Pins 40
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 40
ECCN Code EAR99
Type Clock Generator, Fanout Distribution, Multiplexer
Subcategory Clock Generators
Voltage - Supply 2.97V~3.63V
Terminal Position QUAD
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number AD9572
Output CMOS, LVDS, LVPECL
Pin Count 40
Number of Outputs 7
Qualification Status Not Qualified
Operating Supply Voltage 3.3V
Number of Elements 2
Number of Circuits 1
Frequency (Max) 156.25MHz
Input Crystal
Ratio - Input:Output 1:7
Primary Clock/Crystal Frequency-Nom 25MHz
PLL Yes
Differential - Input:Output No/Yes
Divider/Multiplier Yes/No
Height Seated (Max) 0.8mm
Length 6mm
Width 6mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

AD9572ACPZPEC-R7 Overview


In order to package it as a clock IC, the Tape & Reel (TR) package is used. This clock generator is embedded in the 40-WFQFN Exposed Pad, CSP package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. It contains a total of 40 terminations within RF synthesizer. A voltage of 3.3V should be applied to this electronic frequency generator. Crystal is designed for clock generator's input. To access the full performance of the electronic component, 1 circuits are implemented. An upper frequency limit of 156.25MHz Max can be achieved with this clock-based frequency synthesizer. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There are 2.97V~3.63V different supply voltages that can be provided for this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. In this case, we are dealing with a frequency synthesizer that can be used with CMOS, LVDS, LVPECL logic levels. This electronic component can be classified into Clock Generator, Fanout Distribution, Multiplexer. Microprocessors are specifically designed to use this clock-generating IC, which has a 40-bit output. This part number AD9572 is related to the following electrical components. There are 40 pins on the frequency generators that are available for use. The supply voltage should be maintained at 3.3V for high efficiency. In general, this clock PLL is considered a Clock Generators device. 7 signal outputs enable clock PLL to magnify output frequency as high as possible. IC clock generator consists of 2 elements.

AD9572ACPZPEC-R7 Features


Available in the 40-WFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V

AD9572ACPZPEC-R7 Applications


There are a lot of Analog Devices Inc. AD9572ACPZPEC-R7 Clock Generators applications.

  • Signal analyzer
  • Infotainment systems
  • Clock signals to the high-speed Digital RF circuits
  • 10 Gigabit Ethernet
  • Peripheral devices
  • Instrument
  • Modems
  • Symbol synchronization
  • Telecommunication systems
  • Digital switching systems

Write a review

Note: HTML is not translated!
    Bad           Good