Parameters |
Length |
6mm |
Width |
6mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
40-WFQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
40 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
40 |
ECCN Code |
EAR99 |
Type |
Clock Generator, Fanout Distribution, Multiplexer |
Subcategory |
Clock Generators |
Voltage - Supply |
2.97V~3.63V |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD9572 |
Output |
CMOS, LVDS, LVPECL |
Pin Count |
40 |
Number of Outputs |
7 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Number of Elements |
2 |
Number of Circuits |
1 |
Frequency (Max) |
156.25MHz |
Input |
Crystal |
Ratio - Input:Output |
1:7 |
Primary Clock/Crystal Frequency-Nom |
25MHz |
PLL |
Yes |
Differential - Input:Output |
No/Yes |
Divider/Multiplier |
Yes/No |
Height Seated (Max) |
0.8mm |
AD9572ACPZPEC-RL Overview
A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. There is a clock generator embedded in the 40-WFQFN Exposed Pad, CSP package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. There are 40 terminations found in this file. The clock generator ic should be grounded with a voltage of 3.3V. This clock generator receives its inputs from Crystal, which is designed to be the clock source. For a full understanding of the electronic part's performance, 1 circuits are implemented. There is a maximum frequency of 156.25MHz Max with this clock-based frequency generator. PLL clock is mounted in the way of Surface Mount. There are 2.97V~3.63V available for use with this clock PLL. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. A frequency synthesizer which is compatible with the CMOS, LVDS, LVPECL logic levels is presented here. It is possible to classify this electronic component as a Clock Generator, Fanout Distribution, Multiplexer. In particular, this clock PLL is designed to be used with microprocessors. This part number AD9572 is related to the following electrical components. The frequency synthesizer has 40 pins that are available. The supply voltage should be maintained at 3.3V for high efficiency. This clock generator can be classified as a kind of Clock Generators in general. The output frequency can be magnified as high as possible with the assistance of 7 signal outputs. An efficient 2-element frequency generator with low jitter performance is being offered here.
AD9572ACPZPEC-RL Features
Available in the 40-WFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
AD9572ACPZPEC-RL Applications
There are a lot of Analog Devices Inc. AD9572ACPZPEC-RL Clock Generators applications.
- Pulsed digital systems
- Televisions
- Signal demodulation
- Main oscillator in receiver
- Picocells, femtocells and small cells
- Microwave point-to-point systems
- Modems
- Communication infrastructure
- Clock recovery
- Microwave backhaul IF