AD9631ANZ
| Parameters | |
|---|---|
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 3mV |
| Gain | 52 dB |
| Settling Time | 16 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 7μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Noise Figure | 18 dB |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.3W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | AD9631 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 18mA |
| Nominal Supply Current | 18mA |
| Power Dissipation | 1.3W |
| Output Current | 70mA |
| Quiescent Current | 18mA |
| Slew Rate | 1300V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 6V~12V ±3V~6V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 320MHz |
| Gain Bandwidth Product | 130MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 130000 kHz |
| Voltage Gain | 52dB |
AD9631ANZ Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. A Voltage Feedback-type buffer amplifier is shown here. The op amp is delivered to you in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. This linear amplifier should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, buffer amplifier rates 10mV voltage. This electronic component is recommended to be mounted using the mounting type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . A supply current of 18mA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 52dB at all times. Instrumentation amplifier has 1 channels on it. The current is quiescent at 18mA.
AD9631ANZ Features
8 Pins
supply voltage of 5V
52dB voltage gain
AD9631ANZ Applications
There are a lot of Analog Devices Inc. AD9631ANZ Instrumentational OP Amps applications.
- Comparator
- Logarithmic operation circuits
- Signal filtering
- E-book readers
- Integrator circuits
- Band-stop filter
- Laptop
- Test and measurement instruments
- High/low-pass filter circuit
- Vehicle electronics
