AD9631ARZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 900mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD9631 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 18mA |
| Nominal Supply Current | 18mA |
| Power Dissipation | 900mW |
| Output Current | 70mA |
| Quiescent Current | 18mA |
| Slew Rate | 1300V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 6V~12V ±3V~6V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 10mV |
| Gain Bandwidth Product | 130MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 130000 kHz |
| Voltage Gain | 52dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 3mV |
| Gain | 52 dB |
| Settling Time | 16 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 320MHz |
| Bias Current-Max (IIB) @25C | 7μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Wideband | YES |
| Noise Figure | 18 dB |
| Height Seated (Max) | 2.59mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD9631ARZ-REEL Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. A Voltage Feedback-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins on it. Please take in mind that op amp should be run at 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. It has 8 pins that make up the linear amplifier. The input offset voltage is 10mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 18mA, this op amp ic can operate. There should be no change in the voltage gain. 1 channels are available on the instrumentation amplifier. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. There is an 18mA quiescent current running through op amp ic.
AD9631ARZ-REEL Features
8 Pins
supply voltage of 5V
52dB voltage gain
AD9631ARZ-REEL Applications
There are a lot of Analog Devices Inc. AD9631ARZ-REEL Instrumentational OP Amps applications.
- Medical instruments
- Thermocouples
- Computer workstations
- Test and measurement instruments
- Communication
- Commercial audio systems
- Instrumentation
- Hand-held batteries
- Polarized electrodes
- Oscilloscopes
