AD9632ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 900mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD9632 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 17mA |
| Power Dissipation | 900mW |
| Quiescent Current | 17mA |
| Slew Rate | 1500V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 6V~12V ±3V~6V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 250MHz |
| Gain Bandwidth Product | 130MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 130000 kHz |
| Voltage Gain | 52dB |
| Power Supply Rejection Ratio (PSRR) | 66dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=2 |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 2mV |
| Gain | 52 dB |
| Settling Time | 16 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 7μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.2pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Noise Figure | 14 dB |
| Input Voltage Noise Density | 4.3nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD9632ARZ Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. A Voltage Feedback-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are included on the operational amplifiers. There is an input offset voltage of 5mV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. The buffer amplifier is capable of operating from a supply current of 17mA . Voltage gain should remain at 52dB. 1 channels are available on the instrumentation amplifier. There is a quiescent current of 17mA in this operational amplifier circuit.
AD9632ARZ Features
8 Pins
supply voltage of 5V
52dB voltage gain
AD9632ARZ Applications
There are a lot of Analog Devices Inc. AD9632ARZ Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- Video amplifiers
- Blood pressure sensors
- High-frequency data acquisition systems
- Fast A/D and D/A converters
- Broadcasting
- High/low-pass filter circuit
- RF cable systems
- Mobile phone
- Measurements of Wheatstone bridge
