Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Max Power Dissipation |
900mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD9632 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Number of Channels |
1 |
Operating Supply Current |
17mA |
Nominal Supply Current |
17mA |
Power Dissipation |
900mW |
Output Current |
70mA |
Quiescent Current |
17mA |
Slew Rate |
1500V/μs |
Amplifier Type |
Voltage Feedback |
Common Mode Rejection Ratio |
90 dB |
Current - Input Bias |
2μA |
Voltage - Supply, Single/Dual (±) |
6V~12V ±3V~6V |
Output Current per Channel |
70mA |
Input Offset Voltage (Vos) |
5mV |
Bandwidth |
250MHz |
Gain Bandwidth Product |
130MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
130000 kHz |
Voltage Gain |
52dB |
Power Supply Rejection Ratio (PSRR) |
66dB |
Low-Offset |
NO |
Frequency Compensation |
YES AVCL>=2 |
Supply Voltage Limit-Max |
6.3V |
Voltage - Input Offset |
2mV |
Gain |
52 dB |
Settling Time |
16 ns |
Low-Bias |
NO |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
7μA |
Programmable Power |
NO |
Dual Supply Voltage |
5V |
Input Capacitance |
1.2pF |
Neg Supply Voltage-Max (Vsup) |
-6.3V |
Noise Figure |
14 dB |
Height Seated (Max) |
2.59mm |
Length |
4.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD9632ARZ-REEL7 Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Op amps are Voltage Feedback types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. A total of 8 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 5mV. Surface Mount is the recommended mounting type of operational amplifiers. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. As long as the supply current of the chip does not exceed 17mA, this op amp ic can operate. There should be no change in the voltage gain. On the buffer amps, there are 1 channels that can be used. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. Buffer amplifier has a quiescent current of 17mA.
AD9632ARZ-REEL7 Features
8 Pins
supply voltage of 5V
52dB voltage gain
AD9632ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD9632ARZ-REEL7 Instrumentational OP Amps applications.
- Information processing
- Thermocouples
- Gaming industry
- Wireless base stations
- Signal transformation
- Television broadcasting equipment
- earphone
- Computer workstations
- Signal amplification
- Weighing systems