AD9634BCPZ-210

12 Bit 0.5mm Tin ADC AD9634 1.8V 32-WFQFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-AD9634BCPZ-210
Package: 32-WFQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 629
Description: 12 Bit 0.5mm Tin ADC AD9634 1.8V 32-WFQFN Exposed Pad, CSP (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	32-WFQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	32
Operating Temperature	-40°C~85°C
Packaging	Tray
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	32
Subcategory	Analog to Digital Converters
Max Power Dissipation	360mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	AD9634
Pin Count	32
Qualification Status	Not Qualified
Operating Supply Voltage	1.8V
Configuration	S/H-ADC
Number of Channels	1
Interface	LVDS
Max Supply Voltage	1.9V
Min Supply Voltage	1.7V
Nominal Supply Current	129mA
Number of Bits	12
Input Type	Differential
Architecture	Pipelined
Max Input Voltage	1.75V
Converter Type	ADC, FLASH METHOD
Supply Type	Single
Reference Type	Internal
Data Interface	LVDS - Parallel
Resolution	1.5 B
Sampling Rate	170 Msps
Voltage - Supply, Analog	1.7V~1.9V
Voltage - Supply, Digital	1.7V~1.9V
Number of Analog In Channels	1
Sampling Rate (Per Second)	210M
Output Bit Code	OFFSET BINARY, 2'S COMPLEMENT BINARY, GRAY CODE
Linearity Error-Max (EL)	0.0098%
Integral Nonlinearity (INL)	0.4 LSB
Sample and Hold / Track and Hold	SAMPLE
Input Capacitance	2.5pF
Ratio - S/H:ADC	1:1
Output Format	PARALLEL, WORD
Signal to Noise Ratio (SNR)	70.3 dB
Differential Nonlinearity	0.4 LSB
Conversion Time-Max	0.0047μs
Height	750μm
Length	5.1mm
Width	5.1mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

AD9634BCPZ-210 Overview

The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 32-WFQFN Exposed Pad, CSP package.The ADC converter is packaged in the way of Tray.The ADC converter is equipped with 1 Functions .There are 32 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 1.8V.The A/D converter has 1 channels.The is equipped with 32 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, FLASH METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 210M Hz.The input type of this electronic AD converter is Differential.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 32 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 1.7V~1.9V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to AD9634 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Single is a coding scheme for identifying supply types.The supply/digital voltage of this electrical AD converter is 1.7V~1.9V.The ADC converter operates with the maximal supply voltage of 1.9V.It operates with the minimal supply voltage of 1.7V.The output formats of this electrical AD converter are PARALLEL, WORD , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 1.8V. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 360mW.The number of channels is growing strong/weak: 1.The maximal input type of this electronic AD converter is 1.75V.