AD9656BCPZ-125
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-WFQFN Exposed Pad, CSP |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Feature | Simultaneous Sampling |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | 3A001.A.5.A.5 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD9656 |
| Pin Count | 56 |
| Operating Supply Voltage | 1.8V |
| Configuration | S/H-ADC |
| Number of Channels | 4 |
| Interface | SPI |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 428mA |
| Nominal Supply Current | 276mA |
| Power Dissipation | 771mW |
| Number of Bits | 16 |
| Input Type | Differential |
| Architecture | Pipelined |
| Max Input Voltage | 2.8V |
| Converter Type | ADC, FLASH METHOD |
| Supply Type | Analog, Digital |
| Reference Type | External, Internal |
| Data Interface | JESD204B |
| Resolution | 2 B |
| Sampling Rate | 125 Msps |
| Voltage - Supply, Analog | 1.7V~1.9V |
| Voltage - Supply, Digital | 1.7V~1.9V |
| Number of Analog In Channels | 4 |
| Sampling Rate (Per Second) | 125M |
| Output Bit Code | OFFSET BINARY, 2'S COMPLEMENT BINARY |
| Linearity Error-Max (EL) | 0.0153% |
| Integral Nonlinearity (INL) | 10 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Ratio - S/H:ADC | 1:1 |
| Output Format | SERIAL |
| Conversion Time-Max | 0.025μs |
| Height | 750μm |
| Length | 8.1mm |
| Width | 8.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD9656BCPZ-125 Overview
The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 56-WFQFN Exposed Pad, CSP package.The ADC converter is packaged in the way of Tray.The ADC converter is equipped with 1 Functions .There are 56 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 1.8V.The A/D converter has 4 channels.The is equipped with 56 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, FLASH METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 125M Hz.The input type of this electronic AD converter is Differential.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 56 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 1.7V~1.9V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to AD9656 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The supply type of this electronic ADC converter is Analog, Digital.The supply/digital voltage of this electrical AD converter is 1.7V~1.9V.Mounting the ADC converter is possible with Surface Mount.The ADC converter operates with the maximal supply voltage of 1.9V.It operates with the minimal supply voltage of 1.7V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 1.8V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 771mW.The number of channels is growing strong/weak: 4.Simultaneous Sampling can be ensured when operating.The maximal input type of this electronic AD converter is 2.8V.This DC DC switching regulator operates from a supply current of 428mA.
AD9656BCPZ-125 Features
1 Functions
56 basic kinds of terminations
56 pin count
Minimal supply voltage of 1.7V
AD9656BCPZ-125 Applications
There are a lot of Analog Devices Inc. AD9656BCPZ-125 ADC applications.
- Multicarrier, multimode digital receivers
- Spectrum Analysis
- Communication test equipment
- Communication Systems
- Micro and pico cell systems, software radios
- Battery Operated Systems
- Transducer
- Multiplexed Data Acquisition Systems
- Data Acquisition Systems
- Telecommunications
