AD96687BP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | AD96687 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, ECL, Open-Emitter |
| Number of Elements | 2 |
| Nominal Supply Current | 18mA |
| Power Dissipation | 240mW |
| Output Current | 30mA |
| Propagation Delay | 3.5 ns |
| Quiescent Current | 18mA |
| Response Time | 2.5 ns |
| Common Mode Rejection Ratio | 70 dB |
| Input Offset Voltage (Vos) | 2mV |
| Neg Supply Voltage-Nom (Vsup) | -5.2V |
| Average Bias Current-Max (IIB) | 13μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Dual Supply Voltage | 6.5V |
| Input Bias Current | 10μA |
| Current - Quiescent (Max) | 18mA36mA |
| Voltage - Input Offset (Max) | 2mV @ -5.2V 5V |
| Current - Input Bias (Max) | 10μA @ -5.2V5V |
| CMRR, PSRR (Typ) | 90dB CMRR, 70dB PSRR |
| Height Seated (Max) | 4.39mm |
| Length | 8.93mm |
| Width | 8.93mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD96687BP Overview
In order to make transportation easier, it is packaged in 20-LCC (J-Lead) .The comparator has an output type of Complementary, ECL, Open-Emitter .This chip is designed with the Tube package.The comparator has 20 terminals.The electrical component here belongs to the Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.The type of the chip can be classified as with Latch .In total, it contains 2 elements.The pinout of the component starts from 20 pins it has.A Surface Mount mounting type is recommended.Electronic comparator is recommended that the operating temperature be set to -25°C~85°C in order to prevent malfunctions.The comparator is equipped with 20 pins.You can find more pin-to-pin solutions for your special requirements by searching AD96687 .A quiescent current of 18mA is displayed by this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current of the device be 18mA .
AD96687BP Features
Complementary, ECL, Open-Emitter output capability
with Latch IC
Employing 2 elements
Operates under -25°C~85°C
Quiescent Current: 18mA
AD96687BP Applications
There are a lot of Analog Devices Inc. AD96687BP linear comparators applications.
- Battery management and protection
- Self-diagnostics
- Window Comparators, Multivibrators
- Factory automation & control
- Ultra-Low Power Systems
- Zero-Crossing Detectors
- Wireless Base Stations
- Building automation
- Alarm and Monitoring Circuits
- Set Top Boxes
