AD976ABNZ
| Parameters | |
|---|---|
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD976 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Bipolar |
| Power Supplies | 5V |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 11mA |
| Power Dissipation | 100mW |
| Number of Bits | 16 |
| Input Type | Single Ended |
| Architecture | SAR |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Analog, Digital |
| Reference Type | External, Internal |
| Data Interface | Parallel |
| Resolution | 2 B |
| Sampling Rate | 200 ksps |
| Voltage - Supply, Analog | 5V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 200k |
| Output Bit Code | 2'S COMPLEMENT BINARY |
| Integral Nonlinearity (INL) | 2 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Input Capacitance | 22pF |
| Ratio - S/H:ADC | 1:1 |
| Signal to Noise Ratio (SNR) | 85 dB |
| Differential Nonlinearity | -1 LSB |
| Conversion Time-Max | 4μs |
| Height | 4.95mm |
| Length | 36.2mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 100mW |
AD976ABNZ Overview
The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 28-DIP (0.600, 15.24mm) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 28 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 28 pin count.The peak reflow temperature (Cel) amounts to NOT APPLICABLE to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Through Hole.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 200k Hz.The input type of this electronic AD converter is Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 28 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to AD976 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Analog, Digital can be used to categorize supply types.There is a possibility of mounting the analogue to digital converter by using the Through Hole axis.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.This electrical digital converter operates from a supply voltage of 5V.The ADC converter operates from 5V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 100mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 100mW.The number of channels is growing strong/weak: 1.
AD976ABNZ Features
1 Functions
28 basic kinds of terminations
28 pin count
Minimal supply voltage of 4.75V
5V power supplies
AD976ABNZ Applications
There are a lot of Analog Devices Inc. AD976ABNZ ADC applications.
- Displaying
- Micro and pico cell systems, software radios
- Digital Storage Oscilloscope
- Communication test equipment
- Audio/Video devices
- Scientific instruments
- Uninterrupted Power Supplies
- Broadband data applications
- Data Acquisition Systems
- TD-SCDMA, WiMAX
