ADA4000-4ARUZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4000 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Operating Supply Current | 6.6mA |
| Quiescent Current | 1.65mA |
| Supply Current-Max | 7.2mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 8V~36V ±4V~18V |
| Output Current per Channel | 28mA |
| Input Offset Voltage (Vos) | 1.7mV |
| Gain Bandwidth Product | 5MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 114dB |
| Average Bias Current-Max (IIB) | 0.003μA |
| Power Supply Rejection Ratio (PSRR) | 92dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 200μV |
| Low-Bias | YES |
| Input Capacitance | 5.5pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Offset Current-Max (IIO) | 0.0005μA |
| Input Voltage Noise Density | 16nV/sqrt Hz |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4000-4ARUZ-RL Overview
Packaged in a 14-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. Buffer amps of this type are called J-FET-types. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. It is estimated that there will be at least 14 terminations this year. The total number of pins on linear amplifier is 14. Please take in mind that this instrumentation amplifier should be run at 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 14 pins are located on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 1.7mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 6.6mA . Op amp is a member of the 114dB's 114dB family. Op amp ic has 4 channels. It is used TAPE AND REEL to pack the op amps. Currently, linear amplifier is operating with a quiescent current of 1.65mA.
ADA4000-4ARUZ-RL Features
14 Pins
supply voltage of 5V
114dB voltage gain
ADA4000-4ARUZ-RL Applications
There are a lot of Analog Devices Inc. ADA4000-4ARUZ-RL Instrumentational OP Amps applications.
- Portable electronic products powered by batteries
- Semiconductor detectors
- Scintillation detectors
- Home audio systems
- Ultrasound transducers
- Industrial control system
- Test and measurement instruments
- Communication device
- Signal transformation
- Information processing
