ADA4000-4ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4000 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Operating Supply Current | 6.6mA |
| Quiescent Current | 1.65mA |
| Supply Current-Max | 7.2mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 8V~36V ±4V~18V |
| Output Current per Channel | 28mA |
| Input Offset Voltage (Vos) | 1.7mV |
| Bandwidth | 5MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 114dB |
| Average Bias Current-Max (IIB) | 0.003μA |
| Power Supply Rejection Ratio (PSRR) | 92dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 200μV |
| Low-Bias | YES |
| Dual Supply Voltage | 9V |
| Input Capacitance | 5.5pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Offset Current-Max (IIO) | 0.0005μA |
| Input Voltage Noise Density | 16nV/sqrt Hz |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4000-4ARZ Overview
There is a 14-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Op amps are J-FET types of amplifier on the chip. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. A total of 14 terminations have been reported in the past few weeks. It consists of a total of 14 pins in total. Please take in mind that this instrumentation amplifier should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. A total of 14 pins are present on the instrumentation amplifier. Op amp rates 1.7mV as input offset voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Using a supply current of 6.6mA , this buffer op amp will be able to operate. It is a member of the 114dB's 114dB family. Instrumentation amplifier has 4 channels on it. There is an 1.65mA quiescent current running through op amp ic.
ADA4000-4ARZ Features
14 Pins
supply voltage of 5V
114dB voltage gain
ADA4000-4ARZ Applications
There are a lot of Analog Devices Inc. ADA4000-4ARZ Instrumentational OP Amps applications.
- Power transmission
- Fission chambers
- single/dual op amp sum and difference circuits
- Differentiator circuits
- Car stereo
- Video computer boards
- Portable electronic products powered by batteries
- Industrial control system
- PDA
- Polarized electrodes
