Parameters |
Amplifier Type |
J-FET |
Common Mode Rejection Ratio |
105 dB |
Current - Input Bias |
20pA |
Voltage - Supply, Single/Dual (±) |
10V~36V ±5V~18V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
1.5mV |
Gain Bandwidth Product |
16.7MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
16700 kHz |
Voltage Gain |
112dB |
Average Bias Current-Max (IIB) |
0.004μA |
Power Supply Rejection Ratio (PSRR) |
110dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
500μV |
Settling Time |
1.2 μs |
Low-Bias |
YES |
Micropower |
NO |
-3db Bandwidth |
10.3MHz |
Bias Current-Max (IIB) @25C |
0.00003μA |
Programmable Power |
NO |
Input Capacitance |
4.8pF |
Wideband |
NO |
Input Voltage Noise Density |
8.8nV/sqrt Hz |
Length |
4.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADA4001 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Number of Elements |
1 |
Number of Channels |
2 |
Operating Supply Current |
4mA |
Quiescent Current |
2mA |
Slew Rate |
25V/μs |
Architecture |
VOLTAGE-FEEDBACK |
ADA4001-2ARZ-R7 Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Op amps are J-FET types of amplifier on the chip. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. The buffer op amp includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 1.5mV. For this electronic part, it is recommended that you mount it with type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. This op amp can operate from a supply current at 4mA. Voltage gain should remain at 112dB. Buffer op amp is equipped with 2 channels on the device. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The linear amplifier consists of 1 different elements in total. The linear amplifier is packaged by using a TAPE AND REEL axis. Buffer amplifier has a quiescent current of 2mA.
ADA4001-2ARZ-R7 Features
8 Pins
supply voltage of 15V
112dB voltage gain
Output Type: Rail-to-Rail
ADA4001-2ARZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4001-2ARZ-R7 Instrumentational OP Amps applications.
- Ultrasound transducers
- Power control
- Thermocouples
- Medical imaging
- Video computer boards
- Signal operation
- Displayers for aircraft and air transportation control systems
- Home audio systems
- Information processing
- Oscilloscopes