ADA4004-1ARJZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | iPolar® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4004 |
| Pin Count | 5 |
| Number of Channels | 1 |
| Operating Supply Current | 2.2mA |
| Quiescent Current | 2.2mA |
| Supply Current-Max | 2.4mA |
| Slew Rate | 2.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 113 dB |
| Current - Input Bias | 40nA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 125μV |
| Bandwidth | 12MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 12000 kHz |
| Voltage Gain | 112.04dB |
| Power Supply Rejection Ratio (PSRR) | 118dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 40μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.09μA |
| Programmable Power | NO |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4004-1ARJZ-R7 Overview
There is a SC-74A, SOT-753 case package that contains the instrumentation amplifiers. Op amps are General Purpose types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. There have been a total of 5 terminations over the past year. There are a total of 5 pins on this op amp. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. An 5-pin op amp ic is included in the package. As far as the input offset voltage is concerned, linear amplifier rates at 125μV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 2.2mA volt supply current is needed for this linear amplifier to operate. Maintain 112.04dB as the voltage gain. Buffer op amp is equipped with 1 channels on the device. The instrumentation amplifier is packed in the form of TAPE AND REEL. The iPolar? indicates the series number of the op amp. The current is quiescent at 2.2mA.
ADA4004-1ARJZ-R7 Features
5 Pins
supply voltage of 5V
112.04dB voltage gain
ADA4004-1ARJZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4004-1ARJZ-R7 Instrumentational OP Amps applications.
- Active probe
- PDA
- Gaming industry
- Portable electronic products powered by batteries
- Weak signal detection
- Communication device
- Automation control systems
- Biopotential
- Portable docking station
- Ultrasound transducers
