ADA4004-2ARMZ-R7
| Parameters | |
|---|---|
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 125μV |
| Bandwidth | 12MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 12000 kHz |
| Voltage Gain | 112.04dB |
| Average Bias Current-Max (IIB) | 0.165μA |
| Power Supply Rejection Ratio (PSRR) | 118dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 40μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.09μA |
| Programmable Power | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | iPolar® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4004 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | +-5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 4.4mA |
| Quiescent Current | 2.2mA |
| Slew Rate | 2.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 113 dB |
| Current - Input Bias | 40nA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
ADA4004-2ARMZ-R7 Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case which makes it easy for the consumer to handle. General Purpose-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used for delivering the op amp. In recent months, the number of terminations has approached 8. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. A total of 8 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 125μV. For this electronic part, it is recommended that you mount it with type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 4.4mA and 10 . It is recommended to keep the voltage gain at 112.04dB at all times. There are 2 channels on the operational amplifiers. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. As the name implies, iPolar? refers to the series of the buffer op amp. There is an 2.2mA quiescent current in linear amplifier.
ADA4004-2ARMZ-R7 Features
8 Pins
supply voltage of 5V
112.04dB voltage gain
ADA4004-2ARMZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4004-2ARMZ-R7 Instrumentational OP Amps applications.
- Communication
- Laptop
- Precision measurement
- Differentiator circuits
- Radiation thermometry transducers
- Signal amplification
- Scintillation detectors
- Micro signal measurement
- Power transmission
- Voltage regulation circuit
