ADA4051-1AKSZ-R2
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4051 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 15μA |
| Quiescent Current | 15μA |
| Supply Current-Max | 0.02mA |
| Slew Rate | 0.06V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 20pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 2μV |
| Bandwidth | 115 kHz |
| Gain Bandwidth Product | 125kHz |
| Unity Gain BW-Nom | 125 kHz |
| Voltage Gain | 135dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00007μA |
| Programmable Power | NO |
| Input Capacitance | 5pF |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4051-1AKSZ-R2 Overview
The linear amplifier is packaged in a 5-TSSOP, SC-70-5, SOT-353 case which makes it easy for the consumer to handle. An op amp ic of the Zero-Drift type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be at least 5 terminations this year. The total number of pins on linear amplifier is 5. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 5 pins are included on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 2μV. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, op amp ranges -40°C~125°C. Operational amplifier can operate supply current at 15μA. Op amp is a member of the 135dB's 135dB family. On this buffer amplifier, there are 1 circuits. On the buffer amps, there are 1 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. 15μA quiescent currents are flowing through buffer op amp.
ADA4051-1AKSZ-R2 Features
5 Pins
supply voltage of 5V
135dB voltage gain
Output Type: Rail-to-Rail
ADA4051-1AKSZ-R2 Applications
There are a lot of Analog Devices Inc. ADA4051-1AKSZ-R2 Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- Navigation
- Radiation thermometry transducers
- Automatic control
- High input resistance broadband
- Instrumentation
- Signal operation
- Computer workstations
- Tablets
- Digital cameras
