ADA4051-1AKSZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Supplier Device Package | SC-70-5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | ADA4051 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 15μA |
| Quiescent Current | 15μA |
| Current - Supply | 15μA |
| Slew Rate | 0.06V/μs |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 20pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 17μV |
| Bandwidth | 125 kHz |
| Gain Bandwidth Product | 125kHz |
| Voltage Gain | 135dB |
| Power Supply Rejection Ratio (PSRR) | 135dB |
| Voltage - Input Offset | 2μV |
| Settling Time | 110 μs |
| Current - Output / Channel | 15mA |
| Input Capacitance | 5pF |
| Number of Amplifiers | 1 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4051-1AKSZ-R7 Overview
In the package, you will find a 5-TSSOP, SC-70-5, SOT-353-case to contain the op amp ic. An op amp of this type is a Zero-Drift-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The op amp ic has an array of 5 pins on it. There is an input offset voltage of 17μV for this buffer op amp. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 15μA . The voltage gain should stay at 135dB. There are 1 circuits on this op amp. Instrumentation amplifier has 1 channels on it. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. It should not lower than -40°C to operate buffer amplifier. Linear amplifier shouldn't be used above 125°C degrees. 1 elements make up the design of this buffer amplifier. This electronic part is recommended to be used with an 15μA supply for best performance. With regard tp supply voltage, op amp is used under 5.5V. A voltage of 1.8V or higher is recommended for the linear amplifier's supply voltage. Linear amplifier has a quiescent current of 15μA. There are 1 amplifiers on it.
ADA4051-1AKSZ-R7 Features
135dB voltage gain
Output Type: Rail-to-Rail
ADA4051-1AKSZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4051-1AKSZ-R7 Instrumentational OP Amps applications.
- Industrial control system
- High-frequency data acquisition systems
- earphone
- Semiconductor detectors
- Test equipment
- PDA
- High gain DC amplifier
- Subtraction operation circuits
- Exponential operation circuits
- Voltage regulation circuit
