ADA4051-2ACPZ-R2
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADA4051 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 13μA |
| Quiescent Current | 13μA |
| Supply Current-Max | 0.034mA |
| Slew Rate | 0.06V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 20pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 2μV |
| Bandwidth | 115 kHz |
| Gain Bandwidth Product | 125kHz |
| Unity Gain BW-Nom | 125 kHz |
| Voltage Gain | 135dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00007μA |
| Input Capacitance | 5pF |
| Height | 900μm |
| Length | 3.25mm |
| Width | 3.25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4051-2ACPZ-R2 Overview
Packaged in a 8-WFDFN Exposed Pad, CSP case, the buffer op amp is ready to use. An op amp ic of the Zero-Drift type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There have been a total of 8 terminations over the past year. A total of 8 pins are located on this board. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are located on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 2μV voltage. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using an 13μA supply current, this operational amplifier ics can be operated. Maintain 135dB as the voltage gain. There are 2 circuits on op amps. 2 channels are available on the instrumentation amplifier. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. It is used TAPE AND REEL to pack the op amps. Currently, linear amplifier is operating with a quiescent current of 13μA.
ADA4051-2ACPZ-R2 Features
8 Pins
supply voltage of 5V
135dB voltage gain
Output Type: Rail-to-Rail
ADA4051-2ACPZ-R2 Applications
There are a lot of Analog Devices Inc. ADA4051-2ACPZ-R2 Instrumentational OP Amps applications.
- Navigation
- Communication
- Commercial audio systems
- Proportional counter tubes
- Cinema or auditorium audio system
- Television
- High input resistance broadband
- Television broadcasting equipment
- High/low-pass filter circuit
- Car stereo
