ADA4051-2ACPZ-RL
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADA4051 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 26μA |
| Quiescent Current | 13μA |
| Supply Current-Max | 0.034mA |
| Slew Rate | 0.06V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 20pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 15μV |
| Gain Bandwidth Product | 125kHz |
| Unity Gain BW-Nom | 125 kHz |
| Voltage Gain | 135dB |
| Power Supply Rejection Ratio (PSRR) | 135dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 2μV |
| Settling Time | 110 μs |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00007μA |
| Input Capacitance | 5pF |
| Height Seated (Max) | 0.9mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4051-2ACPZ-RL Overview
In the package, you will find a 8-WFDFN Exposed Pad, CSP-case to contain the op amp ic. Zero-Drift-type instrumentation amplifiers are used in this application. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. It has 8 pins that make up the linear amplifier. Op amp ic rates 15μV for input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 26μA supply current, this operational amplifier ics can be operated. Maintain 135dB as the voltage gain. There are 2 channels on the operational amplifiers. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. It is used TAPE AND REEL to pack the op amps. Buffer amplifier has a quiescent current of 13μA.
ADA4051-2ACPZ-RL Features
8 Pins
supply voltage of 5V
135dB voltage gain
Output Type: Rail-to-Rail
ADA4051-2ACPZ-RL Applications
There are a lot of Analog Devices Inc. ADA4051-2ACPZ-RL Instrumentational OP Amps applications.
- Weighing systems
- Automation control systems
- Test and measurement instruments
- Differentiator circuits
- Tablets
- Digital cameras
- Exponential operation circuits
- Video conversion and routing
- Precision measurement
- Portable media players
