ADA4051-2ARMZ-R7
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4051 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 26μA |
| Quiescent Current | 13μA |
| Supply Current-Max | 0.034mA |
| Slew Rate | 0.06V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 20pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 15μV |
| Gain Bandwidth Product | 125kHz |
| Unity Gain BW-Nom | 125 kHz |
| Voltage Gain | 135dB |
| Power Supply Rejection Ratio (PSRR) | 135dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 2μV |
| Settling Time | 110 μs |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00007μA |
| Input Capacitance | 5pF |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
ADA4051-2ARMZ-R7 Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. An op amp of this type is a Zero-Drift-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There have been a total of 8 terminations over the past year. It consists of a total of 8 pins in total. Please take in mind that op amp should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, buffer amplifier rates 15μV voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 26μA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 135dB. Buffer op amp is equipped with 2 channels on the device. On the output type, there are Rail-to-Rail different types of op amps. This linear amplifier pack is based on the TAPE AND REEL axis. The quiescent current is 13μA.
ADA4051-2ARMZ-R7 Features
8 Pins
supply voltage of 5V
135dB voltage gain
Output Type: Rail-to-Rail
ADA4051-2ARMZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4051-2ARMZ-R7 Instrumentational OP Amps applications.
- Industrial applications including automation
- Multiplication circuits
- Broadcasting
- Portable electronic products powered by batteries
- Strain gauges
- Industrial control system
- Precision measurement
- Signal filtering
- Cinema or auditorium audio system
- Laptop
