ADA4062-2ACPZ-R7
| Parameters | |
|---|---|
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN, CSP |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADA4062 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 330μA |
| Quiescent Current | 165μA |
| Slew Rate | 3.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 8V~36V ±4V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 1.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1400 kHz |
| Voltage Gain | 83dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 750μV |
| Settling Time | 3.5 μs |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Input Capacitance | 4.8pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Height Seated (Max) | 0.6mm |
| Length | 1.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ADA4062-2ACPZ-R7 Overview
The linear amplifier is packaged in a 10-UFQFN, CSP case which makes it easy for the consumer to handle. Buffer amps of this type are called J-FET-types. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations is approaching the 10 mark. In this case, there are 10 pins on the board. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of Operational Amplifier. An 10-pin op amp ic is included in the package. The input offset voltage is 1.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. In order for this instrumentation amplifier to operate, the supply current needs to be between 330μA and 10 . 83dB should be the voltage gain. Instrumentation amplifier has 2 channels on it. This linear amplifier pack is based on the TAPE AND REEL axis. The quiescent current is 165μA.
ADA4062-2ACPZ-R7 Features
10 Pins
supply voltage of 15V
83dB voltage gain
ADA4062-2ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4062-2ACPZ-R7 Instrumentational OP Amps applications.
- E-book readers
- High-frequency data acquisition systems
- Automotive sensors
- Oscilloscopes
- Industrial applications including automation
- Television
- Video data acquisition
- Tablets
- Semiconductor detectors
- Computer workstations
