ADA4062-2ARZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4062 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 330μA |
| Quiescent Current | 165μA |
| Slew Rate | 3.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 8V~36V ±4V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Gain Bandwidth Product | 1.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1400 kHz |
| Voltage Gain | 83dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 750μV |
| Settling Time | 3.5 μs |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Input Capacitance | 4.8pF |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4062-2ARZ-RL Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. J-FET-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. In this case, there are 8 pins on the board. It is important to remember that this op amp should be operated at a voltage of 15V volts. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. It has 8 pins that make up the linear amplifier. Op amp ic rates 1.5mV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 330μA and 10 . 83dB should remain the voltage gain. 2 channels are available on the instrumentation amplifier. TAPE AND REEL is adopted to pack the instrumentation amplifier. There is an 165μA quiescent current in linear amplifier.
ADA4062-2ARZ-RL Features
8 Pins
supply voltage of 15V
83dB voltage gain
ADA4062-2ARZ-RL Applications
There are a lot of Analog Devices Inc. ADA4062-2ARZ-RL Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Band-stop filter
- Polarized electrodes
- Inverse/same-phase proportional circuit
- Power control
- Industrial applications including automation
- Blood pressure sensors
- Television broadcasting equipment
- Gaming industry
- Communication device
