ADA4062-2BRZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4062 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 330μA |
| Nominal Supply Current | 165μA |
| Quiescent Current | 165μA |
| Slew Rate | 3.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 8V~36V ±4V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 1.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1400 kHz |
| Voltage Gain | 83dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Settling Time | 3.5 μs |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Dual Supply Voltage | 12V |
| Input Capacitance | 4.8pF |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4062-2BRZ Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Op amps are J-FET types of amplifier on the chip. A Tube case is used to deliver the buffer op amp. We are approaching the 8h termination of the year. A total of 8 pins are attached to buffer op amp. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 8 pins that make up the linear amplifier. Op amp ic rates 1.5mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 330μA . You should keep the voltage gain at 83dB for the time being. As far as the device is concerned, buffer amplifier has 2 channels. This linear amplifier pack is based on the TAPE AND REEL axis. Buffer amplifier has a quiescent current of 165μA.
ADA4062-2BRZ Features
8 Pins
supply voltage of 15V
83dB voltage gain
ADA4062-2BRZ Applications
There are a lot of Analog Devices Inc. ADA4062-2BRZ Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- Television
- Gaming industry
- Instrumentation
- Large motor controllers
- High-frequency data acquisition systems
- Fast A/D and D/A converters
- Power control
- Commercial audio systems
- Thermocouples
