ADA4062-2BRZ-R7

2 Channels 20mA per Channel 2pA 90 dB Instrumentational OP Amps 0.005μA 8V~36V ±4V~18V ADA4062 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADA4062-2BRZ-R7
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 583
Description: 2 Channels 20mA per Channel 2pA 90 dB Instrumentational OP Amps 0.005μA 8V~36V ±4V~18V ADA4062 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADA4062
Pin Count	8
Qualification Status	Not Qualified
Power Supplies	+-15V
Number of Channels	2
Operating Supply Current	330μA
Quiescent Current	165μA
Slew Rate	3.3V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	90 dB
Current - Input Bias	2pA
Voltage - Supply, Single/Dual (±)	8V~36V ±4V~18V
Output Current per Channel	20mA
Input Offset Voltage (Vos)	1.5mV
Gain Bandwidth Product	1.4MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	1400 kHz
Voltage Gain	83dB
Average Bias Current-Max (IIB)	0.005μA
Power Supply Rejection Ratio (PSRR)	90dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	500μV
Settling Time	3.5 μs
Low-Bias	YES
Micropower	YES
Bias Current-Max (IIB) @25C	0.00005μA
Input Capacitance	4.8pF
Height Seated (Max)	1.75mm
Length	4.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Weight	540.001716mg

ADA4062-2BRZ-R7 Overview

Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a J-FET-type. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. Linear amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 15V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The op amp ic has an array of 8 pins on it. Op amp ic rates 1.5mV for input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 330μA . The voltage gain should stay at 83dB. There are 2 channels on the operational amplifiers. The instrumentation amplifier is packed in the form of TAPE AND REEL. There is an 165μA quiescent current in linear amplifier.