ADA4062-4ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4062 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Number of Channels | 4 |
| Operating Supply Current | 660μA |
| Nominal Supply Current | 440μA |
| Quiescent Current | 165μA |
| Slew Rate | 3.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Gain Bandwidth Product | 1.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1400 kHz |
| Voltage Gain | 83dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 750μV |
| Settling Time | 3.5 μs |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Dual Supply Voltage | 12V |
| Input Capacitance | 4.8pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4062-4ACPZ-R7 Overview
Packaging for the buffer amplifier is in the form of a 16-WFQFN Exposed Pad, CSP case. A J-FET-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. It is estimated that there will be at least 16 terminations this year. It consists of a total of 16 pins in total. It is important to remember that this op amp should be operated at a voltage of 15V volts. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 16 pins are included on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 1.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 660μA and 10 . 83dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 4 channels. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. 165μA quiescent currents are flowing through buffer op amp.
ADA4062-4ACPZ-R7 Features
16 Pins
supply voltage of 15V
83dB voltage gain
ADA4062-4ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4062-4ACPZ-R7 Instrumentational OP Amps applications.
- Medical imaging
- Proportional counter tubes
- Strain gauges
- Measurements of Wheatstone bridge
- Integrator circuits
- Band-pass filter
- Fission chambers
- Automation control systems
- Fast A/D and D/A converters
- Displayers for aircraft and air transportation control systems
