ADA4075-2ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | iPolar® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4075 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Operating Supply Current | 3.6mA |
| Quiescent Current | 1.8mA |
| Slew Rate | 12V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 116 dB |
| Current - Input Bias | 30nA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 6.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 6500 kHz |
| Voltage Gain | 117dB |
| Average Bias Current-Max (IIB) | 0.15μA |
| Power Supply Rejection Ratio (PSRR) | 104dB |
| Voltage - Input Offset | 200μV |
| Settling Time | 3 μs |
| Dual Supply Voltage | 18V |
| Input Capacitance | 2.1pF |
| Input Voltage Noise Density | 2.8nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4075-2ARZ Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 8 terminations. Buffer amplifier has a total of 8 pins on it. I would like to remind you that this buffer op amp should be powered by an 15V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 1mV. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 3.6mA . 117dB should remain the voltage gain. There are 2 channels on the operational amplifiers. The iPolar? represents the op amp's series number. 1.8mA quiescent currents are flowing through buffer op amp.
ADA4075-2ARZ Features
8 Pins
supply voltage of 15V
117dB voltage gain
ADA4075-2ARZ Applications
There are a lot of Analog Devices Inc. ADA4075-2ARZ Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- High gain DC amplifier
- Medical imaging
- Video amplifiers
- Commercial audio systems
- Information processing
- Band-pass filter
- Active probe
- Multiplication circuits
- Signal operation
