ADA4077-1ARMZ
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4077 |
| Pin Count | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 400μA |
| Slew Rate | 1.2V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 132 dB |
| Current - Input Bias | 400pA |
| Voltage - Supply, Single/Dual (±) | ±2.5V~15V |
| Output Current per Channel | 22mA |
| Input Offset Voltage (Vos) | 35μV |
| Bandwidth | 3.9MHz |
| Gain Bandwidth Product | 3.6MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3900 kHz |
| Voltage Gain | 130dB |
| Power Supply Rejection Ratio (PSRR) | 123dB |
| Voltage - Input Offset | 50μV |
| Max Frequency | 1kHz |
| Height | 950μm |
| Length | 3.2mm |
| Width | 3.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
ADA4077-1ARMZ Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. This is a General Purpose type op amp. A Tube case is used for delivering the op amp. The number of terminations approaches 8. In total, there are 8 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are available on the instrumentation amplifier. Op amp rates 35μV as input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, this op amp functions well at -40°C~125°C. As long as the supply current of the chip does not exceed 400μA, this op amp ic can operate. There should be no change in the voltage gain at 130dB. There are 1 circuits on op amps.
ADA4077-1ARMZ Features
8 Pins
supply voltage of 5V
130dB voltage gain
ADA4077-1ARMZ Applications
There are a lot of Analog Devices Inc. ADA4077-1ARMZ Instrumentational OP Amps applications.
- High/low-pass filter circuit
- Active probe
- single/dual op amp sum and difference circuits
- Portable media players
- Commercial audio systems
- Subtraction operation circuits
- Inverse/same-phase proportional circuit
- Computer workstations
- Navigation
- Vehicle electronics
