ADA4077-1ARMZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4077 |
| Pin Count | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 400μA |
| Slew Rate | 1.2V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 132 dB |
| Current - Input Bias | 400pA |
| Voltage - Supply, Single/Dual (±) | ±2.5V~15V |
| Output Current per Channel | 22mA |
| Input Offset Voltage (Vos) | 35μV |
| Gain Bandwidth Product | 3.6MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3900 kHz |
| Voltage Gain | 130dB |
| Power Supply Rejection Ratio (PSRR) | 123dB |
| Voltage - Input Offset | 50μV |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4077-1ARMZ-R7 Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. A General Purpose-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. There are a total of 8 pins on this op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are available on the instrumentation amplifier. The input offset voltage is 35μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges -40°C~125°C. This op amp can operate from a supply current at 400μA. There should be no change in the voltage gain. In total, there are 1 circuits on this buffer amplifier.
ADA4077-1ARMZ-R7 Features
8 Pins
supply voltage of 5V
130dB voltage gain
ADA4077-1ARMZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4077-1ARMZ-R7 Instrumentational OP Amps applications.
- Video amplifiers
- Professional videography
- Test and measurement instruments
- Gaming industry
- Weighing systems
- Communication
- Integrator circuits
- Television broadcasting equipment
- Digital cameras
- Automatic control
